LCR METER IM3523

Hioki LCR Meters and Impedance Analyzers range from 1mHz to 3GHz devices to suit a wide range of applications in the testing of electronic components. The IM3523 is designed for basic measurement on production lines so that it can be offered at a low price point, and delivers improved measurement reliability thanks to its contact check function. Key Features • ±0.05% accuracy with wide measurement range (DC, 40Hz to 200kHz, 5mV to 5V, 10uA to 50mA) • Non-stop testing over mixed measurement conditions such as C-D(120 Hz) and ESR(100 kHz) at 10 times the speed of previous models (compared with Model 3532-50) • Built-in comparator and BIN functions • Rapid 2msec test time

Model No. (Order Code)

IM3523

This product is not supplied with measurement probes or test fixtures. Please select and purchase the measurement probe or test fixture options appropriate for your application separately. All probes are constructed with a 1.5D-2V coaxial cable. For an RS-232C connection: A crossover cable for interconnection can be used. You can use the RS-232C CABLE 9637 without hardware flow control.

option

option

option

Application information

Download the sample application and view the Communications Command User Manual.

Click here for the LCR application.

Accuracy calculation information

Calculate accuracy by simply entering a numerical value.

Click here to calculate accuracy.

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

Measurement modes	LCR (Measurement with single condition), Continuous testing (Continuous measurement under saved conditions)
Measurement parameters	Z, Y, θ, X, G, B, Q, Rdc (DC resistance), Rs (ESR), Rp, Ls, Lp, Cs, Cp, D (tanδ), σ, ε
Measurement range	100 mΩ to 100 MΩ, 10 ranges (All parameters defined in terms of Z.)
Displayable range	Z, Y, Rs, Rp, Rdc, X, G, B, Ls, Lp, Cs, Cp : ± (0.00000 [unit] to 9.99999G [unit]) Real value display for Z and Y only θ: ± (0.000° to 180.000°), D: ± (0.00000 to 9.99999) Q: ± (0.00 to 99999.9), Δ%: ± (0.0000% to 999.999%)
Basic accuracy	Z : ±0.05% rdg. θ: ±0.03°
Measurement frequency	40 Hz to 200 kHz (5 digits setting resolution)
Measurement signal level	V mode, CV mode: 5 mV to 5 Vrms, 1 mVrms steps CC mode: 10 μA to 50 mArms, 10 μArms steps
Output impedance	100 Ω
Display	Monochrome LCD
Measurement time	2 ms (1 kHz, FAST, representative value)
Functions	Comparator, BIN measurement (classify function), Panel loading/saving, Memory function
Interfaces	EXT I/O (handler), USB communication (high-speed) Optional: Choose 1 from RS-232C, GP-IB, or LAN
Power supply	100 to 240 V AC, 50/60 Hz, 50 VA max
Dimensions and mass	260 mm (10.24 in) W × 88 mm (3.46 in) H × 203 mm (7.99 in) D, 2.4 kg (84.7 oz)
Accessories	Power cord × 1 , Instruction manual × 1, CD-R (Includes PC commands and sample software) × 1

Log into your myHioki account to access more technical documents and information where available.

Seminar Videos On Demand

No results were found.

Seminar Schedule

No results were found.

Catalogs

Catalog: LCR METER Series	Download PDF [4MB]	English
Catalog: LCR METER IM3523, IM3533	Download PDF [5MB]	English
Catalog: SMD TEST FIXTURE IM9110	Download PDF [1MB]	English

User Guides

LCR Application Guide	Download PDF [4MB]	English
Impedance Measurement Handbook	Download PDF [1MB]	English

Manuals

If you can not download, log into your myHioki account to access more technical documents and information where available.

LCR METER IM3523,IM3533,IM3533-01 IMPEDANCE ANALYZER IM3570 [2MB]	Communication Instruction Manual	English	Ver.07
LCR METER IM3523 [6MB]	Instruction Manual	English	Ver.07
LCR METER IM3523 [6MB]	Instruction Manual	Simplified Chinese	Ver.05
LCR METER IM3523 [6MB]	Instruction Manual	Korean	Ver.02

Outline Drawings

If you can not download, log into your myHioki account to access more technical documents and information where available.

LCR METER IM3523 [156KB]

Ver.00

Technical Notes

No results were found.

Declaration of Conformity

LCR METER IM3523 [121KB]

Ver.03

Drivers, Firmware

LabVIEW driver for LCR Meter IM3523 IM3533 IM3533-01	Freeware	Version 1.00
LCR Application Disk (IM3523/IM3533/IM3533-01/IM3536/IM3570/IM3590/IM7580)	Freeware	REV.14
Sample program for communication with HIOKI products	Freeware	V2.00
LCR Sample Application (3511-50/IM3523/IM3533/IM3533-01/IM3536/IM3570/IM3590)	Freeware	V1.33
LCR METER IM3523	Firmware	V1.13

Others

No results were found.

Options

Probe and Test fixtures

When using the 9268-10 or 9269-10, external constant-voltage and constant-current sources are required.

CONTACT TIPS IM9902

To replace the tip on the L2001, small size

4-TERMINAL PROBE L2000

Cable length 1 m (3.28 ft), DC to 8 MHz, impedance characteristics of 50 Ω, 4-terminal pair configuration, measurable conductor diameter: ø0.3 (0.01 in) to 5 mm (0.20 in)

PINCHER PROBE L2001

• DC to 8MHz, 50Ω termination • Tip electrode spacing: 0.3 to 6 mm • Measurable sample size: 0603 (EIA)

Learn more

CONTACT TIPS IM9901

To replace the tip on the L2001, regular size, bundled with the L2001

SMD TEST FIXTURE 9699

Direct connection type, For measuring SMDs with electrodes on the bottom; DC to 120 MHz, test sample dimensions: 1.0 mm (0.04 in) to 4.0 mm (0.16 in) wide, max. 1.5 mm (0.06 in) high

SMD TEST FIXTURE IM9100

• Direct-connection testing • Test SMDs with electrodes on the bottom • DC to 8MHz • Measurable sample sizes: 01005 to 0402 (EIA)

Learn more

4-TERMINAL PROBE 9140-10

Cable length 1 m (3.28 ft), DC to 200 kHz, impedance characteristics of 50 Ω, 4-terminal pair configuration, measurable conductor diameter: ø0.3 (0.01 in) to 5 mm (0.20 in)

TEST FIXTURE 9261-10

Cable length 1 m (3.28 ft), DC to 8 MHz, impedance characteristics of 50 Ω, 4-terminal pair configuration, measurable conductor diameter: ø0.3 (0.01 in) to 1.5 mm (0.06 in)

TEST FIXTURE 9262