CLAMP ON PROBE

9132-50

Simply Connect to a Tester or Recorder to Easily Measure Large Currents

Hioki current sensors are best-in-class devices for accurately capturing a wide range of current levels. The 9132-50 is multi-range 1000A AC voltage output clamp sensors for capturing waveforms with DMMs and Memory HiCorders. CAT III 600 V Key Features • Economical clamp sensors for waveform recording with Memory HiCorders • Choose from up to six general-purpose ranges



Model No. (Order Code)

9132-50 BNC output terminal

Note: For commercial power lines, 50/60 Hz (separate power supply not required).

CE

Key Features

• Economical clamp sensors for waveform recording with Memory HiCorders • Choose from up to six general-purpose ranges


Basic specifications (Accuracy guaranteed for 1 year)

Rated current20 A to 1000 A AC, 6 ranges
Accuracy±3 % rdg. ±0.2 % f.s. (45 to 66 Hz)
Frequency characteristicsAdd to amplitude accuracy for frequencies from 40 to 1 kHz: ± 1 % rdg.
Output rate0.2 V AC f.s. (f.s. = setting rage)
(Connect to a voltage input device providing a high input impedance of 1 MΩ)
Max. allowable input1000 A rms continuous (all ranges)
(For 40 Hz to 500 Hz: 100 %, and for 500 Hz to 1 kHz: within 90 % of derating)
Max. rated voltage to earth600 Vrms (50/60 Hz, CAT III)
Core diameterφ55 mm (2.17 in), or 20 mm (0.79 in) × 80 mm (3.15 in) busbar
Dimensions and mass100 mm (3.94 in)W × 224 mm (8.82 in)H × 35 mm (1.38 in)D, 600 g (21.2 oz), cord length: 3 m (9.84 ft)
AccessoriesInstruction manual ×1

Log into your myHioki account to access more technical documents and information where available.

Seminar Videos On Demand

No results were found.

Catalogs

No results were found.

User Guides

No results were found.

Manuals

If you can not download, log into your myHioki account to access more technical documents and information where available.


Instruction Manual English
Ver.05
Instruction Manual French
Ver.01
Instruction Manual German
Ver.01

Outline Drawings

If you can not download, log into your myHioki account to access more technical documents and information where available.



Ver.01

Technical Notes

No results were found.

Declaration of Conformity


Ver.04

Drivers, Firmware

No results were found.

Others

No results were found.

Options

Options

CONVERSION ADAPTER 9704

Receiving end: Female BNC; Output end: Male banana-plug *Not compatible with older generation Memory Hicorders with banana input terminals

Gallery

No results were found.


  • Search


    Search Results Include Discontinued Products

    Login to myHIOKI

    Download

  • Ask

    • Ask Online

     

  • Quote

    • Request a Quote
    • Locate a Distributor

Related Products List


​​