CLAMP ON SENSOR
9695-03
For measuring load current, voltage output sensor100 A AC
Hioki current sensors are best-in-class devices for use with power meters, and PQAs. The 9695-03 is a 100A AC clamp sensor with voltage output for measuring load current. CAT III 300V For power meters and power loggers (may require the 9219) Key Features • High ±0.3% accuracy • For inverter devices or commercial power lines • Fits in narrow spaces due to compact design
9695-03 | For the PW3360/65, 3169, PW3198 and similar products |
---|
Note: Supports power quality analyzers, power meters
Rated measurement current | 100 A AC |
---|---|
Max. measurement current | Continuous 130 A (45 to 66 Hz) |
Output rate | 1 mV AC/ A |
Amplitude accuracy (45 to 66 Hz) | ±0.3 % rdg. ±0.02 % f.s. |
Phase accuracy | ±1° (45 Hz to 5 kHz) |
Amplitude frequency characteristics | Within ±1% at 40 Hz - 5 kHz (deviation from amplitude accuracy) |
Max. rated voltage to earth | 300 V AC rms or less (Insulated conductor) |
Measurable conductor diameter | φ 15 mm (0.59 in) or less |
Operating temperature and humidity | 0°C to 50°C (32°F to 122°F), 80% RH or less (no condensation) |
Dimensions and mass | 50.5 mm (1.99 in)W × 58 mm (2.28 in)H × 18.7 mm (0.74 in)D, 50 g (1.8 oz) Output terminal : M3 terminal (outside 3 mm, 0.12 inch diameter) Option: Connection cable 9219 (3 m, 9.84 ft length) |
Log into your myHioki account to access more technical documents and information where available.
No results were found. |
No results were found. |
No results were found. |
No results were found. |
If you can not download, log into your myHioki account to access more technical documents and information where available.
CLAMP ON SENSOR 9695-02,9695-03 [547KB] |
Instruction Manual |
Japanese English |
Ver.08 |
If you can not download, log into your myHioki account to access more technical documents and information where available.
CLAMP ON SENSOR 9695-03 [40KB] |
Ver.03 |
No results were found. |
No results were found. |
No results were found. |
No results were found. |
CONNECTION CABLE 9219
Connect with the 9695-02/ -03, Output BNC terminal, 3m (9.84ft) length
CLAMP SENSOR CABLE 9238
For the 9695, 3 m twisted-pair cable with round clipping terminal
No results were found.