AC/DC CURRENT SENSOR

9709

High Precision DC to 100 kHz/500A AC/DC Pull-through Current Sensor with ±0.05% Basic Accuracy

Hioki pull-through AC/DC current sensors are best-in-class devices for use with power meters, Memory HiCorders and high performance oscilloscopes. The 9709 is a DC to 100kHz/500A sensor, ideal for capturing current signals from switching power supplies, inverters, power conditioners, etc. CAT III 1000 V Key Features • Super high precision, ±0.05% amplitude accuracy, ±0.2° phase accuracy • Wide-bandwidth DC to 20 kHz (CT6865), 100 kHz (9709) excellent frequency characteristics • Ideal for evaluation of solar power generation and fuel cells to measure battery charge and discharge and the secondary side of inverters • For observing waveforms to be used with the oscilloscopes or Memory HiCorders (use with SENSOR UNIT)



Model No. (Order Code)

9709 500 A AC/DC
9709-05 500 A AC/DC, ME15W terminal

CE

Basic specifications (Accuracy guaranteed for 6 months, Post-adjustmentaccuracy guaranteed for 6 months)

Rated input current500 A AC/DC
Max. allowable input700 Arms (1000 Apeak, requires derating at frequency)
Frequency characteristicsAmplitude: DC to 100 kHz
Phase: DC to 100 kHz
Amplitude and Phase accuracyDC, 45 Hz ≤ f ≤ 66 Hz
(±0.05 % rdg. ±0.01 % f.s. (Phase: ±0.2°) )Defined to 100 kHz
Output voltage rate2 V /rated current value
(voltage output with the Sensor Unit, use with a device having a 1 MΩ input resistance or higher)
Max. rated voltage to earthAC/DC 1000 V (50/60 Hz, CAT III )
Core diameterφ 36 mm (1.42 in)
Operating temperature, humidity0°C to +50°C (32°F to 122°F)
80% rh or less (with no condensation)
Power supply±11 V to ±15 V DC (Power suppled via the Sensor Unit, which supports 100 to 240 V AC)
Power consumption5 VA max. (at 500 A/55 Hz, ±12 V power requirement)
Dimensions and mass160 mm (6.30 in)W × 112 mm (4.41 in)H × 50 mm (1.97 in)D, 850 g (30.0 oz), cord length: 3 m (9.84 ft)
AccessoriesInstruction manual ×1, Mark bands ×6

Compatible models...9709 (-05)

Compatible models97099709-05
Power Analyzer PW6001, PW3390△ (Requires CT9900)OK
Power Analyzer 3390OK△ (Requires CT9901)
Power HiTester 3193 seriesOK△ (Requires CT9901)
Current Unit 8971△ (Requires the 9318)△ (Requires the 9318, CT9901)
F/V Unit 8940△ (Requires the 9318, the 9705)△ (Requires the 9318, the 9705, CT9901)

Hioki offers members manuals and other technical documentation.
The documents are available for download on your myHIOKI page.

Catalogs

AC/DC CURRENT SENSOR CT6862, CT6863, 9709 Download PDF  [1MB]
e-BOOK
English
CLAMP ON PROBE 3270 series, AC/DC CURRENT SENSOR CT6860 series Download PDF  [2MB]
e-BOOK
English
SENSOR UNIT CT9555, CT9556, CT9557 Download PDF  [1MB]
e-BOOK
English

User Guides

No results were found.

Manuals

Instruction Manual English
Ver.07

Outline Drawings


Ver.02
No results were found.

Drivers, Firmware

No results were found.

Others

No results were found.

Options

Options A

CONNECTION CORD 9165

Cord has metallic BNC connectors at both ends, use at metallic terminal, 1.5 m (4.92 ft) length

CONNECTION CORD L9217

Cord has insulated BNC connectors at both ends, 1.6 m (5.25 ft) length

SENSOR UNIT CT9555

• Power supply for current sensors when used alone • 1ch, with Waveform output

Learn more

SENSOR UNIT CT9556

• Power supply for current sensors when used alone • 1ch, with Waveform/RMS output

Learn more

SENSOR UNIT CT9557

• Power supply for current sensors when used alone • 4ch, with Waveform/Total Waveform/Total RMS output

Learn more

Options B

The CT9903 connects up to 2 cables in series, Cannot be used in combination with the 9277 to 9279

CONVERSION CABLE CT9900

Convert PL23 (10-pin) terminal to ME15W (12-pin) terminal

EXTENSION CABLE CT9903

5 m (16.41 ft) length, PL23 (10 pin) - PL23 (10 pin) connector

Options C

The CT9902 connects up to 2 cables in series

EXTENSION CABLE CT9902

5 m (16.41 ft) length, ME15W (12 pin) - ME15W (12 pin) connector

CONVERSION CABLE CT9901

ME15W (12 pin) to PL23 (10 pin) connector

Options D

For connecting to the F/V Unit 8940 or Current Unit 8971

CONVERSION CABLE 9705

0.2 m (0.66 ft) length, to connect the CT6841-6846, CT6863/6865, 9709, 9272-10 to the F/V Unit 8940, Cannot be used in combination with the CT6862

CONVERSION CABLE 9318

To connect the CT6841-6846, CT6865/63/62, 9709, 9272-10 to the 8971/40/51, 38 cm (14.96 in) length

Gallery

No results were found.


  • Search


    Search Results Include Discontinued Products

    Login to myHIOKI

    Download

  • Ask

     

    • email
    • Ask Online
  • Quote

    • Request a Quote
    • Locate a Distributor

Related Products List


​​