AUTOMATIC INSULATION / WITHSTANDING HiTESTER

3153

All-in-one Model that Combines Withstand Voltage and Insulation Resistance (AC/DC)

The Hioki electrical safety testers are designed for insulation resistance and voltage withstand testing of electrical devices and components according to various safety standards. The 3153 is an automatic insulation and AC/DC voltage withstanding tester that fully supports automated testing. Key Features • Programmable insulation (50 to 1,200 V DC) and dielectric strength (AC/DC) testing • Program up to 32 files of test types, test points (50 steps), and measurement settings • Optional scanner for multipoint automatic testing • Uses the PWM method to generate accurate test voltages that do not depend on the supply voltage • Ramp timer function for increasing or decreasing the applied voltage during dielectric strength testing at user-specified times



Model No. (Order Code)

3153 Insulation, AC/DC Withstanding Voltage

Guarantee3years
GPIB
RS232C
CE

■ Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

FunctionsProgram up to 32 files of 50 step test settings.
10 sets each of dielectric strength and insulation test settings, hold, buzzer
Monitor functionsOutput voltage, detected current, measured resistance, Refresh rate: 2 times/s
Power supply100 to 120 V, 200 to 240 V AC, (50/60 Hz), 1000 VA max.
Dimensions and mass320 mm (12.60 in) W × 155 mm (6.10 in) H × 480 mm (18.9 in) D, 18 kg (634.9 oz)
AccessoriesH.V. Test Lead 9615 (high voltage side and return, 1 each) ×1, Power cord ×1, Instruction manual ×1, Spare fuse ×1

[Withstanding test]

Testing voltage AC/DC0.2 kV to 5.00 kV AC, 500 VA (max. 30 minutes), 0.2 kV to 5.00 kV DC, 50 VA (continuance)
Voltage settingDigital setting (0.01 kV setting resolution)
Waveform/FrequencySine wave (5% or less distortion, unloaded), 50/60 Hz selectable
Current measurement0.01 mA to 100.0 mA, Average rectified display (Digital)
Measurement range10 mA (0.01 mA resolution), 100 mA (0.1 mA resolution)
VoltmeterDigital: accuracy ±1.5 % f.s. (f.s.=5.00 kV) (Average rectified display)
Decision methodWindow comparison (digital settings)

[Insulation test]

Rated testing voltage50 to 1,200 V DC (in 1 V steps)
Rated testing current1 mA, Short-circuit current: 200 mA or less
Measurement range/accuracy0.10 to 9999 MΩ, 4 ranges, ± 4 % rdg. (representative values for 0.5 MΩ to 1,000 MΩ)
Decision methodWindow comparison (digital settings)

[Timer]*Test times may differ from set timer times depending on the load.

Setting range0.3 to 999 s
Ramp/delayTesting voltage ramp-up, or down, Insulation test delay: 0.1 to 99.9 s

Log into your myHioki account to access more technical documents and information where available.

Seminar Videos On Demand

No results were found.

Seminar Schedule

No results were found.

Catalogs

Catalog: INSULATION / WITHSTANDING Test Instrument series 3153, 3159, 3174, ST5520 Download PDF  [2MB] English

User Guides

Introducing the safety standards, testing methods, and appropriate test instruments for electrical medical equipment Download PDF  [1MB] English

Manuals

If you can not download, log into your myHioki account to access more technical documents and information where available.


Instruction Manual English
Ver.16

Outline Drawings

If you can not download, log into your myHioki account to access more technical documents and information where available.



Ver.04

Technical Notes

No results were found.

Drivers, Firmware

No results were found.

Others

No results were found.

Options

Input/Output cords

*The 9615 is bundled

REMOTE CONTROL BOX (SINGLE) 9613

For Start/Stop control, 1.5m (4.92 ft) cord length

REMOTE CONTROL BOX (DUAL) 9614

For Start/Stop control, 1.5m (4.92 ft) cord length

H.V. TEST LEAD 9615

Red, Black each 1, 1.5 m (4.92 ft) length

PC communication

SAFETY TEST DATA MANAGEMENT SOFTWARE 9267

• PC software for controlling electrical safety measuring instruments

Learn more

RS-232C CABLE 9637

9 pin - 9 pin, cross, 1.8 m (5.91 ft) length

GP-IB CONNECTOR CABLE 9151-02

2 m (6.56 ft) length

Other

HIGH VOLTAGE SCANNER 3930

• Supports remote control • For automatic multipoint testing of insulation / withstand voltage • Use with the 3153's program or with general-purpose logic sequencers

Learn more

Gallery

No results were found.


  • Search


    Search Results Include Discontinued Products

    Login to myHIOKI

    Download

  • Ask

    • Ask Online

     

  • Quote

    • Request a Quote
    • Locate a Distributor

Related Products List


​​