DIFFERENTIAL PROBE

P9000

Easily Connect to Hioki Memory HiCorders and HiLoggers for High Voltage Testing

• Compact probe for CAT III 1000V environments • Wave mode: Observe instantaneous waveforms • RMS mode: Observe RMS value waveforms • Principal areas of use 1. High-voltage battery circuits in EVs, HEVs, and other automobiles 2. High-voltage circuits in energy-related equipment such photovoltaic cells 3. Commercial power line circuits (480 Vrms, etc.) 4. High-voltage surge noise from inverters, motors, solenoids, etc.

Model No. (Order Code)

P9000-01 For the Memory HiCorder series, Wave only
P9000-02 For the Memory HiCorder series, Wave/RMS

Connect to a Memory HiCorder’s analog input terminal. Must be powered by an AC adapter, USB bus power, or other suitable power source.

CE

Basic specifications (Accuracy guaranteed for 1 year)

P9000-01P9000-02
Measurement functionsWaveform monitor output only
Frequency characteristics: DC to 100 kHz, -3 dB
Waveform monitor output/AC RMS value output (switchable)
Wave mode frequency characteristics: DC to 100 kHz, -3 dB
RMS mode frequency characteristics: 30 Hz to 10 kHz; response time: 300 ms (rising) or 500 ms (falling)
Division ratio1000:1 or 100:1 (user selectable)
DC amplitude accuracy±0.5% f.s. (f.s. = 1.0 V; voltage division ratio: 1000:1) (f.s. = 3.5 V; voltage division ratio: 100:1)
RMS amplitude accuracy±1% f.s. (30 Hz to 1 kHz non-inclusive, sine wave), ±3% f.s. (1 kHz to 10 kHz, sine wave)
Input resistance, capacityBetween H and L: 10.5 MΩ, 5 pF or less (at 100 kHz)
Max. allowable input1000 V AC/DC
Max. rated voltage to earth1000 V AC/DC (CAT III)
Operating temperature -40 ˚C (-40 ˚F) to 80 ˚C (176˚F)
Power supply(1) AC Adapter Z1008 (100 to 240 V AC, 50/60 Hz), 6 VA (including AC adapter) or 0.9 VA (probe only)
(2) USB bus power (5 V DC, USB Micro-B receptacle), 0.8 VA
To prevent an electric shock, when supplying power from the USB-microB terminal, please supply from a device which USB's GND terminal of the source device is grounded.
(3) External power supply (2.7 V to 15 V DC)
Dimensions and mass128 mm (5.04 in)W × 36 mm (1.42 in)H × 22 mm (0.87 in)D, 170 g (6.0 oz), Cord length: Input: 70 cm (2.30 ft) ; output: 1.5 m (4.92 ft)
AccessoriesInstruction manual ×1, alligator clips ×2, carrying case ×1

■ Number of P9000 probes that can be used when power is supplied from the standard USB terminal of the Memory HiCorder

(Caution) To prevent an electric shock, connect the power cord supplied with the main unit (Memory HiCorder or AC adapter for the P9000) to a grounded 2-pole outlet.
(Caution) Custom-order 3-branch cable cannot be used with the standard USB terminal of the main unit (Memory HiCorder).

Main unitNumber of the P9000-01, P9000-02 connections
MR88801
MR88751
MR8847A1
MR88272
MR87402
MR87412
MR8740T8
MR6000, MR6000-016
(The USB terminal in the media box of MR6000 cannot be used)

Log into your myHioki account to access more technical documents and information where available.

Seminar Videos On Demand

No results were found.

Seminar Schedule

No results were found.

Catalogs

Catalog: DIFFERENTIAL PROBE P9000 Download PDF  [1MB] English

User Guides

No results were found.

Manuals

If you can not download, log into your myHioki account to access more technical documents and information where available.


Instruction Manual English
Ver.01

Outline Drawings

If you can not download, log into your myHioki account to access more technical documents and information where available.



Ver.00

Ver.00

Declaration of Conformity


Ver.02

Drivers, Firmware

No results were found.

Others

No results were found.

Options

Power supplies

AC ADAPTER Z1008

100 to 240V AC

Input cable options

Test Pin Set L4932 is required when using the Small Alligator Clip Set L4934.

GRABBER CLIP 9243

Attaches to the tip of the banana plug cable, Red/ Black: 1 each, 196 mm (7.72 in) length, CAT III 1000 V

EXTENSION CABLE SET L4931

Expands the length of L4930/4940, 1.5 m (4.92 ft) length

TEST PIN SET L4932

Attaches to the tip of the L4930/4940, CAT IV 600 V, CAT III 1000 V

SMALL ALLIGATOR CLIP SET L4934

Attaches to the tip of the L4932, L9207-10/DT4911, L9206, CAT III 300 V, CAT II 600 V

ALLIGATOR CLIP SET L4935

Attaches to the tip of the L4930/4940, CAT IV 600 V, CAT III 1000 V

BUS BAR CLIP SET L4936

Attaches to the tip of the L4930/4940, CAT III 600 V

MAGNETIC ADAPTER SET L4937

Attaches to the tip of the L4930/4940, CAT III 1000 V

TEST PIN SET L4938

Attaches to the tip of the L4930/4940, CAT III 600 V

BREAKER PIN SET L4939

Attaches to the tip of the L4930/4940, CAT III 600 V

Output cables

CONVERSION CABLE L1011

30 cm (0.98 ft) length, covert BNC to wire

CONVERSION CABLE L1011-10

2.4 m (7.87 ft) length, covert BNC to wire

Special order cables

Please contact your local HIOKI distributor

(1) USB Bus Power Cable
(2) USB A/Micro-B Cable
(3) Three-branch Cable

Gallery

No results were found.


  • Search


    Search Results Include Discontinued Products

    Login to myHIOKI

    Download

  • Ask

    • Ask Online

     

  • Quote

    • Request a Quote
    • Locate a Distributor

Related Products List