AC/DC CURRENT SENSOR

CT6863

Delivering Wide-bandwidth and High-precision Current Measurement

Hioki pull-through AC/DC current sensors are best-in-class devices for use with power meters, Memory HiCorders and high performance oscilloscopes. The CT6863 is a DC to 500kHz/200A sensor, and this is ideal for capturing current signals from switching power supplies, inverters, power conditioners, etc. CAT III 1000 V Key Features • Super high precision, ±0.05% amplitude accuracy, ±0.2° phase accuracy • Applications in the fields of electric and hybrid electric vehicles • Wide operating temperature range fit for automobile applications • Ideal for evaluation of solar power generation and fuel cells to measure battery charge and discharge and the secondary side of inverters • For observing waveforms to be used with the oscilloscopes or Memory HiCorders (use with SENSOR UNIT)



Model No. (Order Code)

CT6863 200 A AC/DC
CT6863-05 200 A AC/DC, ME15W terminal

CE

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

Rated current200 A AC/DC
Max. allowable input400 A (requires derating)
Frequency characteristicsAmplitude: DC to 500 kHz
Phase: DC to 300 kHz
Amplitude and Phase accuracyDC ±0.05 % rdg. ±0.01 % f.s. (Phase: Not defined)
16 Hz ≤ f ≤ 400 Hz ±0.05 % rdg. ±0.01 % f.s. (Phase: ±0.2°)
Defined to 500 kHz
Output voltage2 V /rated current value
(voltage output with the Sensor Unit, use with a device having a 1 MΩ input resistance or higher)
Max. rated voltage to earthAC/DC 1000 V (50/60 Hz, CAT III )
Core diameterφ 24 mm (0.94 in)
Operating temperature, humidity-30°C to +85°C (-22°F to 185°F), 80% RH or less (with no condensation)
Power supply±11 V to ±15 V DC (Power suppled via the Sensor Unit, which supports 100 to 240 V AC)
Power consumption6 VA max. (at 200 A/55 Hz, ±12 V power requirement)
Dimensions and mass70 mm (2.76 in)W × 100 mm (3.94 in)H × 53 mm (2.09 in)D, 350 g (12.3 oz), cord length: 3 m (9.84 ft)
AccessoriesInstruction manual ×1, Mark bands ×6

Model CT6863 Compatibility

Compatible modelsCT6863 Combination status
Model PW6001OK
Model 3390OK
Model 8971 for the MR8827, MR8847 seriesOK
Input unit Model 9602 for the 3193-10/3193/3194OK
In combination, recognized as the 9278
Model 8940 for Memory HiCordersRequires Conversion Cable 9705 and Conversion Cable 9318, used as a substitute for the 9278

Hioki offers members manuals and other technical documentation.
The documents are available for download on your myHIOKI page.

Catalogs

AC/DC CURRENT SENSOR CT6862, CT6863, 9709 Download PDF  [1MB]
e-BOOK
English
CLAMP ON PROBE 3270 series, AC/DC CURRENT SENSOR CT6860 series Download PDF  [2MB]
e-BOOK
English
SENSOR UNIT CT9555, CT9556, CT9557 Download PDF  [1MB]
e-BOOK
English

User Guides

No results were found.

Manuals

Instruction Manual English
Ver.07

Outline Drawings


Ver.00
No results were found.

Drivers, Firmware

No results were found.

Others

No results were found.

Options

Options A

CONNECTION CORD 9165

Cord has metallic BNC connectors at both ends, use at metallic terminal, 1.5 m (4.92 ft) length

CONNECTION CORD L9217

Cord has insulated BNC connectors at both ends, 1.6 m (5.25 ft) length

SENSOR UNIT CT9555

• Power supply for current sensors when used alone • 1ch, with Waveform output

Learn more

SENSOR UNIT CT9556

• Power supply for current sensors when used alone • 1ch, with Waveform/RMS output

Learn more

SENSOR UNIT CT9557

• Power supply for current sensors when used alone • 4ch, with Waveform/Total Waveform/Total RMS output

Learn more

Options B

The CT9903 connects up to 2 cables in series, Cannot be used in combination with the 9277 to 9279

CONVERSION CABLE CT9900

Convert PL23 (10-pin) terminal to ME15W (12-pin) terminal

EXTENSION CABLE CT9903

5 m (16.41 ft) length, PL23 (10 pin) - PL23 (10 pin) connector

Options C

The CT9902 connects up to 2 cables in series

CONVERSION CABLE CT9901

ME15W (12 pin) to PL23 (10 pin) connector

EXTENSION CABLE CT9902

5 m (16.41 ft) length, ME15W (12 pin) - ME15W (12 pin) connector

Options D

For connecting to the F/V Unit 8940 or Current Unit 8971

CONVERSION CABLE 9705

0.2 m (0.66 ft) length, to connect the CT6841-6846, CT6863/6865, 9709, 9272-10 to the F/V Unit 8940, Cannot be used in combination with the CT6862

CONVERSION CABLE 9318

To connect the CT6841-6846, CT6865/63/62, 9709, 9272-10 to the 8971/40/51, 38 cm (14.96 in) length

Gallery

No results were found.


  • Search


    Search Results Include Discontinued Products

    Login to myHIOKI

    Download

  • Ask

     

    • email
    • Ask Online
  • Quote

    • Request a Quote
    • Locate a Distributor

Related Products List


​​