PHASE DETECTOR
PD3129-10
Phase Rotation Meter with Easy-to-Read Arrow and Non-Metallic Contact Clips for 70V to 1000V Lines
Hioki’s non-contact voltage detection and measurement technology places efficiency and safety as priority considerations with the goal of protecting customers that need to conduct on-site electrical work as part of renovations and expansions of manufacturing plants and buildings. Model PD3129-10 is a non-contact phase rotation meter that detects the phase of electrical current flow within insulated wires without using metallic contact voltage clips. The green arrow indicates normal phase, which can be useful for visual reports that document the proper completion of electrical work. CAT IV 600 V, CAT III 1000 V Key Features • Simply clip clamps onto wire insulation • Green LED arrow clearly shows phase direction, perfect for visual reports • CAT III 1000V • Rotating LED indicator shows the phase sequence for a 3-phase power supply at a glance • Intermittent beeps signal positive phase; continuous tone signals reverse phase • Magnetic base allows the instrument to be secured on a distribution panel
PD3129-10 | Large clips |
---|
The arrow in the center of the instrument turns green to indicate normal phase. In this way, normal phase can be recognized at a glance. In addition, the arrow shows up clearly in photographs, making the PD3129 ideal for documenting proper installation in end-of-project reports.
Functions | Phase detection (positive and negative) |
---|---|
Voltage detection method | Static induction |
Voltage range | 70 to 1000 V AC (50/60 Hz) (sine wave, continuous input) |
Frequency range | 45 Hz to 66 Hz |
Object to be connected | 7 mm (0.28 in) to 40 mm (1.57 in) of insulated wiring |
Display | Phase detection : Positive ; 4 LEDs lit in clockwise order and the buzzer sounds intermittently, green arrow lights up Negative ; 4 LEDs lit in counterclockwise order and the buzzer sounds continuously |
Battery check function | Power ON lamp: lights up (Power ON), blinks (Battery LOW) |
Auto power off | Auto shut off if no activity is detected after power is turned ON for 15 minutes |
Power supply | R6P (AA) manganese battery ×2, Continuous use: 70 hr |
Dimensions and mass | 70 mm (2.76 in)W × 75 mm (2.95 in)H × 30 mm (1.18 in)D, 240 g (8.5 oz), Cord length : 0.7 m (2.30 ft) |
Accessories | Carrying case ×1, Strap ×1, Spiral tube ×1, Instruction manual ×1, R6P (AA) manganese battery ×2 |
Log into your myHioki account to access more technical documents and information where available.
No results were found. |
No results were found. |
Catalog: PHASE DETECTOR,VOLTAGE DETECTOR Series | Download PDF [3MB] |
English |
No results were found. |
If you can not download, log into your myHioki account to access more technical documents and information where available.
Instruction Manual |
Japanese English |
Ver.00 | |
Instruction Manual |
English French |
Ver.00 | |
Instruction Manual |
English German |
Ver.00 |
If you can not download, log into your myHioki account to access more technical documents and information where available.
PHASE DETECTOR PD3129-10 [63KB] |
Ver.02 |
No results were found. |
PHASE DETECTOR PD3129,PD3129-10 [99KB] |
Ver.01 |
No results were found. |
No results were found. |
No results were found.