BATTERY IMPEDANCE METER
BT4560
Achieve Long Service Life Battery Modules by Measuring Reaction Resistance
Hioki benchtop battery testers support simultaneous high-speed measurement in the ever-expanding production lines of increasingly larger lithium-ion low resistance batteries. The BT4560 battery impedance tester measures the impedance of lithium-ion batteries using the low-frequency AC-IR measurement method without charging and discharging the battery, substantially reducing the time needed to inspect the internal resistance of battery cells. Key Features • Low-frequency AC-IR measurement* : Measure the reaction resistance of a battery *The BT4560 ensures battery cell quality by measuring internal impedance at a low frequency of 1 Hz or below • Extremely reliable measurements for low-impedance batteries *The BT4560 uses a testing current of 1.5 A at the 3mΩ range, which improves the S/N ratio • Circuit configuration highly tolerant of contact and wire resistance to provide stable measurements • Voltage measurement function equivalent to 6-digit DMM (± 0.0035% rdg.)
BT4560 |
---|
Note: This product is not supplied with measurement probes. Please select and purchase the measurement probe options appropriate for your application separately.
○ Set your own measurement frequency between 100 mHz and 1.05 kHz ○ Use low frequencies to measure electrode reaction resistance ○ Use high frequencies to measure electrolyte resistance and welding resistance ○ Create Cole-Cole plots (with bundled application program) ○ Use equivalent circuit analytic software to analyze internal battery defects
Allowable input voltage | Up to 5 V |
---|---|
Measured information | Impedance, voltage, temperature |
Impedance measurement | Parameters: R, X, Z, θ, Frequency: 0.1 Hz to 1050 Hz, Measurement ranges: 3.0000 mΩ, 10.0000 mΩ, 100.000 mΩ Testing current: 3 mΩ range: 1.5 Arms, 10 mΩ range: 500 mArms, 100 mΩ range: 50 mArms |
Voltage measurement | Measurement range: 5.00000 V (single range), Measurement time: 0.1 s (Fast) to 1.0 s (Slow) |
Temperature measurement | Range: -10.0 °C to 60.0 °C, Measurement time: 2.3 s |
Basic accuracy | Z: ±0.4% rdg. θ: ±0.1 °, V: ±0.0035% rdg. ±5 dgt. , Temperature: ±0.5 °C (at 10.0 to 40.0 °C) |
Functions | Comparator, self-calibration, sample delay, average, contact check, measurement current error, and other |
Interfaces | RS-232C/USB (virtual COM port) * Cannot be used simultaneously EXT. I/O (NPN/PNP can be switched) |
Power supply | 100 to 240 V AC, 50/60 Hz, 80 VA max |
Dimensions and mass | 330 mm (12.99 in) W × 80 mm (3.15 in) H × 293 mm (11.54 in) D, 3.7 kg (130.5 oz) |
Accessories | Power cord ×1, Instruction manual ×1, Zero-adjustment board ×1, USB cable (A-B type) ×1, CD-R (communication instruction manual, PC application software, USB driver) ×1 |
Log into your myHioki account to access more technical documents and information where available.
No results were found. |
No results were found. |
Catalog: BATTERY IMPEDANCE METER BT4560 | Download PDF [2MB] |
English |
Catalog: BATTERY TESTER Series | Download PDF [8MB] |
English |
White Paper on the Low Frequency AC-IR Method for Testing Li-ion Batteries | Download PDF [4MB] |
English |
Electrical Measurements of Lithium-Ion Batteries | Download PDF [4MB] |
English |
Lead-acid Battery Handbook | Download PDF [1MB] |
English |
If you can not download, log into your myHioki account to access more technical documents and information where available.
BATTERY IMPEDANCE METER BT4560 (Communication Command Instruction Manual) [1000KB] |
Communication Command Instruction Manual |
English |
Ver.00 |
BATTERY IMPEDANCE METER BT4560 [29MB] |
Instruction Manual |
English |
Ver.01 |
BATTERY IMPEDANCE METER BT4560 [5MB] |
Instruction Manual |
Korean |
Ver.01 |
BATTERY IMPEDANCE METER BT4560 [5MB] |
Instruction Manual |
Simplified Chinese |
Ver.01 |
BATTERY IMPEDANCE METER BT4560 [5MB] |
Instruction Manual |
German |
Ver.01 |
BATTERY IMPEDANCE METER BT4560 [5MB] |
Instruction Manual |
French |
Ver.01 |
If you can not download, log into your myHioki account to access more technical documents and information where available.
BATTERY IMPEDANCE METER BT4560 [61KB] |
Ver.00 |
BATTERY IMPEDANCE METER BT4560 [122KB] |
Ver.02 |
LabVIEW driver for BATTERY IMPEDANCE METER BT4560 | Freeware | Version 1.01 |
BT4560 Application Software (Application, USB Driver, Remote Operation Manual) | Freeware | Rev6 V1.06 |
Sample program for communication with HIOKI products | Freeware | V2.10 |
USB Driver (DT4200series 3800series 7016 3554 ST5540 ST5541 BT4560) | Freeware | Version 2.0.0 |
No results were found. |
CLIP TYPE PROBE L2002
Cable length 1.5 m (4.92 ft) length
PIN TYPE PROBE L2003
Cable length 1.5 m (4.92 ft) length
TEMPERATURE SENSOR Z2005
Cable length 1 m (3.28 ft) length
RS-232C CABLE 9637
9 pin - 9 pin, cross, 1.8 m (5.91 ft) length
Last update: June 15, 2018
SWITCH MAINFRAME SW1001
• Pair with a measuring instrument for quick, multi-channel battery testing • Max 60V DC input • Max. 18 (4-terminal pair) to 66 (2-wire) channels
SWITCH MAINFRAME SW1002
• Pair with a measuring instrument for quick, multi-channel battery testing • Max 60V DC input • Max. 72 (4-terminal pair) to 264 (2-wire) channels
No results were found.