CLAMP ON LEAK SENSOR
9657-10
Voltage Output Sensor for Leak Current Measurements
Hioki current sensors are best-in-class devices for accurately capturing a wide range of current levels. The 9657-10 is a voltage output clamp sensor for measuring leak current. The high-permeability magnetic material of the sensor’s core and magnetic shield enables high-precision measurement of very weak currents. Key Features • For general purpose leak current testing • Also supports load current testing • Check for insulation faults
9657-10 | For the PW3360/65, PW3198/3197, LR8513 and similar products |
---|
Note: Supports power quality analyzers with voltage input
Rated primary current | AC 10 A (for leak current measurement, 50/60 Hz) |
---|---|
Max. allowable input (45-66 Hz) | Max. 30 A of continuous input |
Rated output current | AC 100 mV/A |
Amplitude accuracy (45-66 Hz) | ±1.0 % rdg. ±0.05 % f.s. |
Phase accuracy | ±3 ° (at 50 Hz or 60 Hz) |
Frequency characteristics | 40 Hz to 5 kHz: ± 3% (Add to amplitude accuracy) |
Measurable conductor | Insulated conductor |
Core diameter | φ 40 mm (1.57 in) |
Dimensions and mass | 74 mm (2.91 in)W × 145 mm (5.71 in)H × 42 mm (1.65 in)D, 380 g (13.4 oz), Cord length: 3 m (9.84 ft) |
Accessories | Instruction manual ×1 |
Log into your myHioki account to access more technical documents and information where available.
No results were found. |
No results were found. |
No results were found. |
No results were found. |
If you can not download, log into your myHioki account to access more technical documents and information where available.
CLAMP ON LEAK SENSOR 9657-10 [183KB] |
Instruction Manual |
English |
Ver.08 |
If you can not download, log into your myHioki account to access more technical documents and information where available.
CLAMP ON LEAK SENSOR 9657-10 [67KB] |
Ver.05 |
CLAMP ON LEAK SENSOR 9657-10 [66KB] |
Ver.04 |
No results were found. |
CLAMP ON LEAK SENSOR 9657-10 [122KB] |
Ver.01 |
No results were found. |
No results were found. |
No results were found.