WIRELESS CLAMP LOGGER

LR8513

Measure Load Current and Leak Current Easily with Clamp Sensors

Hioki Memory HiLoggers are high-speed data loggers for recording multiple channels of voltage, temperature, resistance or humidity signals, some models providing complete isolation between channels and strong noise resistance. The Hioki LR8513 is a wireless, 2-channel AC/DC current input module that utilizes Bluetooth® technology to either send measured data to the Hioki LR8410 Wireless Logging Station or to an Android (TM) tablet. Key Features • Measure AC and DC load current and AC leak current • Choose from many current sensors • Place inside a distribution panel, close the cover, and monitor measured values from the outside • Measure power easily—just set the voltage and power factor • Compact, two-channel model fits where other devices don’t • Download measurement data to a tablet or computer with Bluetooth® wireless technology or capture in real time with the LR8410 • Three-way power (AC adapter, AA alkaline batteries, or external 5 to 13.5 V power supply) • Store 500,000 data points per channel
Data can be downloaded using Hioki’s tablet and smartphone app (for Android devices). Search for “HIOKI” and download the Wireless Logger Collector!



Model No. (Order Code)

LR8513 2 ch, sensor is sold separately

Note: The LR8513 alone is not capable of making measurements. For the latest information about countries and regions where wireless operation is currently supported, please visit the Hioki website. Bluetooth® is a trademark of Bluetooth SIG, Inc. and licensed for use by HIOKI E.E. CORPORATION.

Guarantee3years
Main unit only
Bluetooth
CE

Get it on Google Play

Precautions concerning use of the CT7731, CT7736, and CT7742 to measure AC/DC load current

The AC/DC Auto-zero Current Sensor CT7731/CT7736/CT7742 cannot be connected directly to the Wireless Clamp Logger LR8513. The Display Unit CM7290 and Output Cord L9095 is required to connect those sensors to the LR8513.


Precautions concerning use of the CT7044, CT7045, and CT7046 to measure AC/DC load current

The AC Flexible Current Sensor CT7044/CT7045/CT7046 cannot be connected directly to the Wireless Clamp Logger LR8513. The Display Unit CM7290 and Output Cord L9095 is required to connect those sensors to the LR8513.


QR Code link to Hioki’s Android app*

Scan this QR Code with an Android device to access the Google Play download page directly *QR Code is a registered trademark of Denso Wave Incorporated.


A compact 2-channel clamp logger that’s ideal for simple measurements such as AC/DC load current or AC leakage current

For applications such as ● Assessing demand every 30 minutes (average value recording) ● Assessing peak leakage current (Maximum value recording) ● PV maintenance ● Automobile tests ● Forklifts ● Railroads ● Equipment maintenance ● Simple electrical measurement (set the voltage and power factor)


A wireless logger whose data can be captured by a smartphone or PC

Built-in Bluetooth(R) wireless technology. Use your tablet or PC to collect data even as signals are being logged. No matter what time during measurement you collect the data, data is automatically merged together into one single file. Review data trends by observing waveforms and numerical values right there in the field. *Pictured: LR8514


Real-time monitoring

By using the Hioki LR8410-20 to acquire data, you can view the waveforms in real time. Furthermore, previous waveforms can be viewed while the device is taking measurements. *Pictured: LR8514


A compact wireless logger that you can place anywhere

Pocket size for installation anywhere. Use the optional MAGNETIC STRAP to hang it on a wall – solving all of your installation space problems. Installing a data logger in a switchboard or control panel has never been easier. Gone is the need to feed wiring through the panel-data collection is done wirelessly so you can close the panel door for safe measurements. The loggers are also useful for measuring in difficult-to-wire locations, like high places or on moving machines.


Power with AA batteries or an AC adapter

The logger will operate for about 10 days on two AA-size alkaline batteries. (Recording interval: 1 sec, with Bluetooth(R) ON) Since the batteries will last longer the less time the Bluetooth(R) function is operating, the instrument features a power-saving function that automatically turns on the Bluetooth(R) circuit during predefined time periods. While communications are disabled, data is reliably stored in the instrument’s large built-in memory, which can hold 500,000 data points per channel. Use the AC adapter to record data over extended periods of time with peace of mind.


Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

Functionality[Used as standalone product (Data collected manually) ]
Windows PC or Windows tablet (CD-R with software included)
Android smartphone or Android tablet terminal
(Software can be downloaded free of charge from Google Play.)
*Communication range varies with the performance of the computer or tablet (up to a line-of-sight distance of roughly 30 m)
[Used as logging module (Real-time measurement) ]
Device can be used as an LR8410 logging module to record and display data in real time and to control up to 7 units, Communication distance: 30 m
Number of channels2ch (common GND)
Measurement itemsAC load current, DC load current, AC leak current (using current sensor)
Effective value calculationSoftware calculates the true RMS value
Measurement range500.0 mA to 2000 A AC, 10.00 A to 2000 A DC (By current sensor)
*Current and leak current that occur intermittently cannot be measured.
Measurement accuracy±0.5% rdg.±5 dgt. (DC, AC 50/60 Hz) *Add the sensor’s accuracy when the current sensor is connected
Display itemsMeasurement value, date, time, number of recorded data, maximum value, minimum value, and average value
FunctionsAlarm, Scaling, Recording operation hold function, Erroneous operation prevention, Comment recording function, Power saving function, Authentication function, Free run
Recording[Capacity] 500,000 data items for each channel [Mode] Instantaneous value, average value, maximum value [Interval] 0.5 to 30 sec, 1 to 60 min, 14 selections
Power sourceAC Adapter Z2003 (100 to 240 V AC, 50/60 Hz), AA alkaline batteries (LR6) ×2, External power 5 to 13.5 V DC (can also be supplied from USB bus power, with a conversion cable)
Continuous operating time ([Capacity] 500,000 data items for each channel) (23˚C) 3 months (Recording interval of 1 min, Bluetooth® OFF), 10 days (Recording interval of 1 sec, Bluetooth® ON), 5 days (Recording interval of 0.5 sec, during real-time measurement with the LR8410)
Dimensions and mass85 mm (3.35 in) W × 75 mm (2.95 in) H × 38 mm (1.50 in) D, 130 g (4.6 oz) (excluding the battery)
AccessoriesCD-R ×1 (Instruction Manual, Logger Utility, Wireless Logger Collector), Measurement Guide ×1, Caution for Using Radio Waves × 1, AA alkaline batteries (LR6) ×2

Countries and regions where wireless operation is currently supported (LR8513)Last update: June 26, 2019

Wireless certificationJapan, United States, Canada, Austria, Belgium, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, United Kingdom, Thailand, Singapore, China, Taiwan, Australia, New Zealand, and Chile
Exempt from the wireless regulationsViet Nam, Hong Kong, Macao, Myanmar, Russian Federation, Colombia, Pakistan, Georgia, and Kenya

Log into your myHioki account to access more technical documents and information where available.

Seminar Videos On Demand

No results were found.

Seminar Schedule

Registration Open

BIXPO 2019 - Gwangju, Korea

Nov 6, 2019 - Nov 8, 2019

Registration Open

ECCE 2019 - Baltimore, Maryland

Sep 29, 2019 - Oct 3, 2019

Catalogs

Catalog: WIRELESS LOGGING STATION LR8410 Download PDF  [6MB] English
Catalog: WIRELESS MINI LOGGER LR8512, LR8513, LR8514, LR8515, LR8520 Download PDF  [3MB] English

User Guides

No results were found.

Manuals

If you can not download, log into your myHioki account to access more technical documents and information where available.


Measurement Guide English
Ver.03
Instruction Manual English
Ver.06
Measurement Guide English
Ver.05
Precautions Concerning Use of Equipment that Emits Radio Waves Japanese
English
Ver.17

Outline Drawings

If you can not download, log into your myHioki account to access more technical documents and information where available.



Ver.03

Declaration of Conformity


Ver.04

Others

No results were found.

Options

AC load current sensors

CLAMP ON SENSOR 9669

• 40Hz to 5kHz • 1000 A AC rated input • φ 55 mm (2.17 in) Core dia.

Learn more

CLAMP ON SENSOR CT6500

• 40 Hz to 1 kHz bandwidth • Primary: 500 A AC • Secondary: 1mV AC/A • Max. input of 600 A AC • φ46 mm (1.81 in) dia.

AC load current sensors

CLAMP ON SENSOR 9695-02

• 40Hz to 5kHz • 50 A AC rated input • φ 15 mm (0.59 in) core dia.

Learn more

CONNECTION CABLE 9219

Connect with the 9695-02/ -03, Output BNC terminal, 3m (9.84ft) length

AC leak current sensors

Clamp on Leak Sensor 9657-10, 9675: Rated primary current 5 A* AC

*Maximum measurable current with used with the LR8513

CLAMP ON LEAK SENSOR 9657-10

• 40 Hz to 5 kHz • Rated 5 A AC • φ 40 mm (1.57 in) core dia.

Learn more

CLAMP ON LEAK SENSOR 9675

• 40 Hz to 5 kHz • Rated 5 A AC • φ 30 mm (1.18 in) core dia.

Learn more

AC load current sensors

The Display Unit CM7290 and the Output Cord L9095 (available separately) are required in order to use these current sensors.

AC FLEXIBLE CURRENT SENSOR CT7040 series

• 10 Hz to 50 kHz (±3dB) • 600A or 6000A AC rated • φ 254 mm (10.00 in) loop dia. to φ 100 mm (3.94 in)

Learn more

DISPLAY UNIT CM7290

• Use with CT7000 series • DCA, ACA, (DC+AC)A, frequency • WAVE, RMS, PEAK, Hz output

Learn more

OUTPUT CORD L9095

Connect to BNC terminal, 1.5 m (4.92 ft) length

AC/DC load current sensors

The Display Unit CM7290 and the Output Cord L9095 (available separately) are required in order to use these current sensors.

AC/DC AUTO-ZERO CURRENT SENSOR CT7731

・ DC to 5 kHz (-3dB) ・ Rated 100 A AC/DC ・φ 33 mm (1.30 in) core dia.

Learn more

AC/DC AUTO-ZERO CURRENT SENSOR CT7736

・ DC to 5 kHz (-3dB) ・ Rated 600 A AC/DC ・φ 33 mm (1.30 in) core dia.

Learn more

AC/DC AUTO-ZERO CURRENT SENSOR CT7742

・ DC to 5 kHz (-3dB) ・ Rated 2000 A AC/DC ・φ 55 mm (2.17 in) core dia.

Learn more

DISPLAY UNIT CM7290

• Use with CT7000 series • DCA, ACA, (DC+AC)A, frequency • WAVE, RMS, PEAK, Hz output

Learn more

OUTPUT CORD L9095

Connect to BNC terminal, 1.5 m (4.92 ft) length

Power supply or other

AC ADAPTER Z2003

100 V to 240 VAC

MAGNETIC STRAP Z5020

Extra strength

Gallery

No results were found.


  • Search


    Search Results Include Discontinued Products

    Login to myHIOKI

    Download

  • Ask

    • Ask Online

     

  • Quote

    • Request a Quote
    • Locate a Distributor

Related Products List


​​