CLAMP ON LEAK SENSOR
9675
Voltage Output Sensor for Leak Current Measurements
Hioki current sensors are best-in-class devices for accurately capturing a wide range of current levels. The 9675 is a voltage output clamp sensor for measuring leak current. The high-permeability magnetic material of the sensor’s core and magnetic shield enables high-precision measurement of very weak currents. CAT III 300V
9675 | For the LR5051, PW3198 and similar products |
---|
Note: Supports power quality analyzers with voltage input
Rated primary current | AC 10 A (for leak current measurement, 50/60 Hz) |
---|---|
Max. allowable input (45-66 Hz) | Max. 10 A of continuous input |
Rated output current | AC 100 mV/A |
Amplitude accuracy (45-66 Hz) | ±1.0 % rdg. ±0.005 % f.s. |
Phase accuracy | ±5 ° (at 50 Hz or 60 Hz) |
Frequency characteristics | 40 Hz to 5 kHz: ± 5% (Add to amplitude accuracy) |
Max. rated voltage to earth | 40 Hz to 5 kHz: ± 5% (Add to amplitude accuracy) |
Core diameter | φ 30 mm (1.18 in) |
Dimensions and mass | 60 mm (2.36 in)W × 112.5 mm (4.43 in)H × 23.6 mm (0.93 in)D, 160 g (5.6 oz), Cord length: 3 m (9.84 ft) |
Accessories | Instruction manual ×1 |
Log into your myHioki account to access more technical documents and information where available.
No results were found. |
Jun 5, 2018 - Jun 7, 2018 | ||
![]() |
Jun 6, 2018 - Jun 9, 2018 | |
![]() |
Jun 13, 2018 - Jun 15, 2018 |
No results were found. |
No results were found. |
Instruction Manual |
English |
Ver.08 |
CLAMP ON LEAK SENSOR 9675 [66KB] |
Ver.03 |
No results were found. |
CLAMP ON LEAK SENSOR 9675 [121KB] |
Ver.07 |
No results were found. |
No results were found. |
No results were found.