IMPEDANCE ANALYZER
IM3570
Single Device Solution for High Speed Testing and Frequency Sweeping
Hioki LCR Meters and Impedance Analyzers range from 1mHz to 3GHz devices to suit a wide range of applications in the testing of electronic components. The IM3570 is ideal for use in applications requiring low-ESR measurement on the order of several milliohms, for example testing of functional polymer capacitors, due to its superior low-impedance repeatability. Key Features • LCR measurement, DCR measurement, sweep measurement, continuous measurement and high-speed testing achieved with one instrument • High-speed testing, achieving maximum speeds of 1.5ms (1 kHz) and 0.5ms (100kHz) in LCR mode • High-accuracy measurements, basic accuracy of Z parameter: ± 0.08% • Perfect impedance analyzer for testing the resonance characteristics of piezoelectric elements, C-D and low ESR measurement of functional polymer capacitors, DCR and L-Q measurement of inductors (coils and transformers) • Perform frequency sweeps, level sweeps, and time interval measurements in analyzer mode
IM3570 |
---|
This product is not supplied with measurement probes or test fixtures. Please select and purchase the measurement probe or test fixture options appropriate for your application separately. For an RS-232C connection: A crossover cable for interconnection can be used. You can use the RS-232C CABLE 9637 without hardware flow control.
The IM3570, which serves as both an LCR meter and an impedance analyzer, can generate pass/fail judgments on the resonance condition using its frequency sweep measurement and peak comparator functions, and also conduct continuous inspections under different conditions including pass/fail decisions via 1 kHz and 120 Hz LCR testing. In this way, it is possible to make both frequency sweep measurement and LCR measurement with a single instrument.
Download the sample application and view the Communications Command User Manual.
Calculate accuracy by simply entering a numerical value.
Measurement modes | LCR mode, Analyzer mode (Sweeps with measurement frequency and measurement level), Continuous measurement mode |
---|---|
Measurement parameters | Z, Y, θ, Rs (ESR), Rp, Rdc (DC resistance), X, G, B, Cs, Cp, Ls, Lp, D (tanδ), Q |
Measurement range | 100 mΩ to 100 MΩ, 12 ranges (All parameters are determined according to Z) |
Display range | Z, Y, Rs, Rp, Rdc, X, G, B, Ls, Lp, Cs, Cp : ±(0.000000 [unit] to 9.999999G [unit], Absolute value display for Z and Y only θ : ±(0.000° to 180.000°), D : ±(0.000000 to 9.999999) Q : ±(0.00 to 99999.99), Δ % : ±(0.0000% to 999.9999%) |
Basic accuracy | Z ±0.08% rdg. θ: ±0.05° |
Measurement frequency | 4 Hz to 5 MHz (5 digits setting resolution, minimum resolution 10 mHz) |
Measurement signal level | Normal mode: V mode/CV mode: 5 mV to 5 Vrms (up to 1 MHz) 10 mV to 1 Vrms (1.0001 MHz to 5 MHz), 1 mVrms steps CC mode: 10 μA to 50 mArms (up to 1 MHz) 10 μA to 10 mArms (1.0001 MHz to 5 MHz), 10 μArms steps Low impedance high accuracy mode: V mode/CV mode: 5 mV to 1 Vrms (up to 100 kHz), 1 mVrms steps CC mode:10 μA to 100 mArms (100 mΩ and 1Ω ranges of up to 100 kHz), 10 μArms steps |
Output impedance | Normal mode: 100 Ω, Low impedance high accuracy mode: 10 Ω |
Display | 5.7-inch color TFT, display can be set to ON/OFF |
Measurement time | 0.5 ms (100 kHz, FAST, display OFF, representative value) |
Functions | DC bias measurement, Comparator, BIN measurement (classification), Panel loading/saving, Memory function |
Interfaces | EXT I/O (handler), RS-232C, GP-IB, USB communication, USB memory, LAN |
Power supply | 90 to 264 V AC, 50/60 Hz, 150 VA max. |
Dimensions and mass | 330 mm (12.99 in) W × 119 mm (4.69 in) H × 307 mm (12.09 in) D, 5.8 kg (204.6 oz) |
Accessories | Power cord × 1, Instruction manual × 1, PC communication instruction manual (CD-R) × 1 |
Log into your myHioki account to access more technical documents and information where available.
No results were found. |
No results were found. |
Catalog: LCR METER Series | Download PDF [4MB] |
English |
Catalog: EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000 | Download PDF [1MB] |
English |
Catalog: SMD TEST FIXTURE IM9110 | Download PDF [1MB] |
English |
Catalog: IMPEDANCE ANALYZER IM3570 | Download PDF [3MB] |
English |
LCR Application Guide | Download PDF [4MB] |
English |
Impedance Measurement Handbook | Download PDF [1MB] |
English |
If you can not download, log into your myHioki account to access more technical documents and information where available.
IMPEDANCE ANALYZER IM3570 [16MB] |
Instruction Manual |
Korean |
Ver.00 |
LCR METER IM3523,IM3533,IM3533-01 IMPEDANCE ANALYZER IM3570 [2MB] |
Communication Instruction Manual |
English |
Ver.07 |
IMPEDANCE ANALYZER IM3570 [17MB] |
Instruction Manual |
English |
Ver.08 |
IMPEDANCE ANALYZER IM3570 [20MB] |
Instruction Manual |
Simplified Chinese |
Ver.07 |
If you can not download, log into your myHioki account to access more technical documents and information where available.
IMPEDANCE ANALYZER IM3570 [165KB] |
Ver.02 |
No results were found. |
IMPEDANCE ANALYZER IM3570 [121KB] |
Ver.04 |
LabVIEW driver for IMPEDANCE ANALYZER IM3570 | Freeware | Version 1.00 |
LCR Application Disk (IM3523/IM3533/IM3533-01/IM3536/IM3570/IM3590/IM7580) | Freeware | REV.12 |
LCR Sample Application (IM3523/IM3533/IM3533-01/IM3536/IM3570/IM3590/IM7580) | Freeware | V1.32 |
IMPEDANCE ANALYZER IM3570 | Firmware | V3.11 |
No results were found. |
When using the 9268-10 or 9269-10, external constant-voltage and constant-current sources are required.
SMD TEST FIXTURE IM9100
• High-precision four-terminal measurement • For direct connection meters • Test SMDs with electrodes on the bottom
4-TERMINAL PROBE 9140-10
Cable length 1 m (3.28 ft), DC to 200 kHz, impedance characteristics of 50 Ω, 4-terminal pair configuration, measurable conductor diameter: ø0.3 (0.01 in) to 5 mm (0.20 in)
TEST FIXTURE 9261-10
Cable length 1 m (3.28 ft), DC to 8 MHz, impedance characteristics of 50 Ω, 4-terminal pair configuration, measurable conductor diameter: ø0.3 (0.01 in) to 1.5 mm (0.06 in)
TEST FIXTURE 9262
Direct connection type, DC to 8 MHz, measurable conductor diameter: ø0.3 (0.01 in) to 2 mm (0.08 in)
SMD TEST FIXTURE 9263
Direct connection type, DC to 8 MHz, Test sample dimensions:1 mm (0.04 in) to 10 mm (0.39 in)
DC BIAS VOLTAGE UNIT 9268-10
Direct connection type, 40 Hz to 8 MHz, maximum applied voltage of DC ±40 V
DC BIAS CURRENT UNIT 9269-10
Direct connection type, 40 Hz to 2 MHz, maximum applied current of DC 2 A
4-TERMINAL PROBE 9500-10
Cable length 1 m (3.28 ft), DC to 200 kHz, impedance characteristics of 50 Ω, measurable conductor diameter: φ0.3 mm (0.01 in) to 2 mm (0.08 in)
SMD TEST FIXTURE 9677
Direct connection type, For measuring SMDs with electrodes on the side; DC to 120 MHz, test sample dimensions: 3.5 mm ±0.5 mm (0.14 in ±0.02 in)
SMD TEST FIXTURE 9699
Direct connection type, For measuring SMDs with electrodes on the bottom; DC to 120 MHz, test sample dimensions: 1.0 mm (0.04 in) to 4.0 mm (0.16 in) wide, max. 1.5 mm (0.06 in) high
CONTACT TIPS IM9901
To replace the tip on the L2001, regular size, bundled with the L2001
CONTACT TIPS IM9902
To replace the tip on the L2001, small size
4-TERMINAL PROBE L2000
Cable length 1 m (3.28 ft), DC to 8 MHz, impedance characteristics of 50 Ω, 4-terminal pair configuration, measurable conductor diameter: ø0.3 (0.01 in) to 5 mm (0.20 in)
PINCHER PROBE L2001
• 2-terminal design • Tip electrode spacing: 0.3 (0.01 in) to 6 mm (0.24 in)
SMD TEST FIXTURE IM9110
• High-precision two-terminal fixture • For direct connection two-terminal measurement meters • High reproducibility with advanced contact technology
Note: Customers who have purchased the Impedance Analyzer IM3570 can add the Equivalent Circuit Analysis Firmware IM9000 function. Please contact your local HIOKI representative.
EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000
• Simple circuit analysis & detailed acceptance/rejection decision-making • Plot frequency characteristics graph from analysis results • Cole-Cole plot, admittance circle display
GP-IB CONNECTOR CABLE 9151-02
2 m (6.56 ft) length
Smart key/immobilizer antenna impedance measurements [428KB]
Pass/Fail Judgment of Passive Components such as Capacitors [310KB]
Test the Characteristics of Piezoelectric Elements at High Speeds [104KB]
Test the Characteristics of Functional Polymer Capacitors [526KB]
Test Inductors Characteristics (Coils and Transformers) [806KB]
Test the Characteristics of a Tantalum Capacitor [642KB]
No results were found.