Japanese Chinese Korea
CLAMP ON SENSOR 9661, 9669 < Current Probes/Clamp Sensors < Products
For current input to be used with Power Meter (3169), Power Quality Analyzer (3196, 3197) For observing waveforms with the MEMORY HiCORDERs

CLAMP ON SENSOR 9661, 9669

CE DCL
Max. circuit voltage
600 V rms insulated wire
3196
8860-50
   
3169		  
OVERVIEW  
Use with Power Meter for large current measurement
  • For inverter devices or commercial power lines
  • Up to 500 A, or 1000 A measure
    • Basic specifications (accuracy guaranteed for 1 year)
      9661 9669
    Rated primary current AC 500 A AC 1000 A
    Output voltage AC 500 mV f.s. (AC 1 mV/A) AC 500 mV f.s. (AC 0.5 mV/A)
    Amplitude accuracy ±0.3 % rdg. ±0.01 % f.s. (45 to 66 Hz, f.s.= rated primary current) ±1.0 % rdg. ±0.01 % f.s. (45 to 66 Hz, f.s.= rated primary current)
    Phase accuracy ±0.5 deg. (at 45 Hz to 5 kHz) ±1 deg. (at 45 Hz to 5 kHz)
    Max. allowable input AC 550 A continuous (45 to 66 Hz) AC 1000 A continuous (45 to 66 Hz)
    Frequency characteristics 40 Hz to 5 kHz: ± 1.0%
    (Add to amplitude accuracy)    		 40 Hz to 5 kHz: ± 2.0%
    (Add to amplitude accuracy)
    Max. rated voltage to earth AC 600 V rms (insulated wire) AC 600 V rms (insulated wire)
    Core jaw diameter φ 46 mm (1.81 in) φ 55 mm (2.17 in) or 80 mm (3.15 in) × 20 mm (0.79 in) busbar
    Dimensions, mass 77 mm (3.03 in)W × 151 mm (5.94 in) H × 42 mm (1.65 in)D, Cord length: 3 m (9.84 ft), 380 g (13.4 oz) 99.5 mm (3.92 in)W × 188 mm (7.40 in)H × 42 mm (1.65 in)D, Cord length: 3 m (9.84 ft), 590 g (20.8 oz)
    Note: In addition to the Power Quality Analyzer 3196, can also be used as a current sensor with Model 3169 and voltage input recorders.
    OVERVIEW