Japanese Chinese Korea
CLAMP ON PROBE 9132-50, 9010-50 < Current Probes/Clamp Sensors < Products
For power line current value measurement (50/60 Hz)

CLAMP ON PROBE 9132-50, 9010-50

CE
CAT III 600V		 DCL
Max. circuit voltage 600V rms insulated wire		 9704
9704: Use when the receiving connectors are banana-type terminals
OVERVIEW OPTION  
Simply connect to a tester or recorder to easily measure large currents
  • CE mark compliant CAT III 600V
  • Choose from up to six general-purpose ranges
  • For more accurate waveform recordings and analysis of harmonic signals, etc.
Basic specifications (Accuracy guaranteed for 1 year, or opening and closing of the clamp sensor 10,000 times)
  9132-50 9010-50
Rated current AC 20/50/100/200/500/1000 A AC 10/20/50/100/200/500 A
Accuracy ±3% rdg. ±0.2% f.s. (45 to 66Hz) ±2% rdg. ±1% f.s. (45 to 66Hz)
Frequency characteristics Add to amplitude accuracy for frequencies from 40 to 1kHz: ± 1% rdg. Add to amplitude accuracy for frequencies from 40 to 1kHz: ±6% rdg. (at 10A and 20A range)
±3% rdg. (for 50A range and above)
Output rate 0.2V AC f.s. (f.s.=setting rage)
(Connect to a voltage input device providing a high input impedance of 1MΩ)
Max. current input (For 40Hz to500 Hz: 100%, and for 500Hz to 1kHz: within 90% of derating)
1000Arms continuous (all ranges)		 (For 40Hz to 100Hz: 100%, and for 100Hz to 1kHz: within 50% of derating)
150Arms continuous (10/20/50A ranges)
400Arms continuous (100/200A ranges)
650Arms continuous (500A range)
Max. circuit voltage 600Vrms (Insulated conductor) 600Vrms (Insulated conductor)
Diameter Ø 55mm(2.17in), or 20mm(0.79in) × 80mm(3.15in) busbar Ø 46mm(1.81in)
Dimensions, mass 100mm(3.94in)W × 224mm(8.82in)H × 35mm(1.38in)D, 600g(21.2oz), cord length: 3m(9.84ft) 78mm(3.07in)W × 188mm(7.40in)H × 35mm(1.38in)D, 420g(14.8oz), cord length: 3m(9.84ft)
OVERVIEW OPTION