| Measurement functions |
Number of channels: 2, for voltage measurement, DC/RMS selectable |
| Input terminals |
Safety banana terminals (input impedance 10 Mω, input capacitance 5 pF or less), Max. rated voltage to earth: 1000 V AC/DC in CAT II, 600 V AC/DC in CAT III (the maximum voltage that can be applied between input channel and chassis and between input channels without damage) |
| Measurement range |
1 V to 50 V/div, 6 ranges, full scale: 20 div, AC voltage for possible measurement/display using the memory function: 700 V rms, low-pass filter: 5/50/500/5 kHz |
| Measurement resolution |
1/1600 of measurement range (using 16-bit A/D conversion and when installed in 8860 series) |
| Highest sampling rate |
2 MS/s (simultaneous sampling in 2 channels) |
| Accuracy |
DC amplitude: ±0.25% of full scale (with filter 5 Hz), zero position : ±0.15% of full scale (with filter 5 Hz, after zero adjustment) |
| RMS measurement |
RMS amplitude accuracy: ±1% of full scale (DC, 40 Hz to 1 kHz, sine waveform), crest factor: 2 |
| Frequency characteristics |
DC to 100 kHz ±3dB |
| Input coupling |
DC, GND |
| Max. allowable input |
1000 V DC (the maximum voltage that can be applied across input pins without damage) |
| Number of installable units |
Install only up to four units in one 8860 series MEMORY HiCORDER |
| Dimensions and mass |
170W × 19.8H × 148.5D mm (6.69 in × 0.78 in × 5.85 in), 310 g (10.9 oz) |
| Accessories |
CONNECTION CORD 9242 × 2 (1.7 m, 5.58 ft length), GRABBER CLIP 9243 × 2 |
