| Recorder Option (Input units for the MEMORY HiCORDER series) |
F/V UNIT 8940 |
| Products marked with an * (asterisk) do not have the CE mark |
 |
|
|
|
|
Compatible MEMORY HiCORDER |
|
| Combined when shipped, or configuration changeable by the user |
|
MEMORY HiCORDER 8826
(Ver. 2.10 or later can be used, Base unit)
(Current probes with a serial number of No. 1999-0338386 or later can be used, older types cannot be used.) |
|
Details |
|
|
|
MEMORY HiCORDER 8835
(Base unit, current probe cannot be used)
(Standard models later than Ver. 2.10, models installed with 9540 Ver. 5.10 or later.) |
|
|
|
MEMORY HiCORDER 8835-01
(Base unit) |
|
| Details |
|
|
|
MEMORY HiCORDER 8841
(Ver. 2.10 or later, Base unit) |
|
| Details |
|
|
|
MEMORY HiCORDER 8842
(Ver. 2.10 or later, Base unit) |
|
| Details |
|
|
|
VISUAL HiCORDER 8720
(Base unit) |
|
|
|
| CONNECTION CORD 9198 |
|
 |
For up to 300 V, 1.5 m (4.92 ft) length |
|
| Details |
|
|
|
| DIFFERENTIAL PROBE 9322 |
|
 |
For up to 2kV DC or 1kV AC. Use with either AC Adapter 9418-15 |
|
| Details |
|
|
|
| POWER CORD 9325 |
|
 |
(power supply from 8940 sensor connector to 9322)
Connects the DIFFERENTIAL PROBE 9322 and sensor terminal of the F/V UNIT 8940 |
|
|
|
| CONNECTION CORD 9217 |
|
 |
Insulation BNC-to-insulation BNC, use to connect to insulation-BNC terminal on Input Module |
|
|
|
| *CONNECTION CORD 9165 |
|
 |
Metal BNC-to-metal BNC, use to connect to metal-BNC terminal on Input Module |
|
|
|
| *PT 9303 |
|
 |
(necessary for measuring power-line frequency)
Insulation transformer, 400 V or 200 V AC input, 10 V AC output, for AC power line measurement. |
|
| Details |
|
|
|
| *LINE SPLITTER CT-101A |
|
 |
For 100V/15A, convenient for measuring 100 VAC line current with clamp-on probe |
|
| Details |
|
|
|
| *CLAMP ON SENSOR 9272-10 |
|
Enables observation of distorted AC current waveforms
Input: 5 to 10 kHz, switch between 20 and 200-A ranges possible, 2 V AC out |
|
 |
Can only be used in combination with the SENSOR UNIT 9555-10 or F/V UNIT 8940 |
|
| Details |
|
|
|
| CONVERSION CABLE 9318 |
|
 |
Connects CLAMP ON SENSORS 9270/ 9271/ 9272 to F/V UNIT 8940 |
|
|
|
|
|
| UNIVERSAL CLAMP ON CT 9277 |
|
 |
Enables waveform observation from DC to distorted AC
Input: DC to 100 kHz, up to 20 A, 2 V AC out |
|
| Details |
|
|
|
| UNIVERSAL CLAMP ON CT 9278 |
|
 |
Enables waveform observation from DC to distorted AC
Input: DC to 100 kHz, up to 200 A, 2 V AC out |
|
| Details |
|
|
|
| *UNIVERSAL CLAMP ON CT 9279 |
|
 |
Enables waveform observation from DC to distorted AC
Input: DC to 20 kHz, up to 500 A, 2 V AC out
Can only be used in combination with the SENSOR UNIT 9555-10 or F/V UNIT 8940 |
|
| Details |
|
|
|
| CONVERSION CABLE 9318 |
|
|
Connects CLAMP ON SENSORS 9277/ 9278/ 9279 to F/V UNIT 8940 |
|
|
|
|
|
|
| CLAMP ON PROBE 3273-50 |
|
 |
Wide (DC to 50 MHz) range, mA-level to 30 A peak current. Requires power from 3272 or F/V UNIT 8940 with CONVERSION CABLE 9319. |
|
| Details |
|
|
|
| CLAMP ON PROBE 3274 |
|
 |
Wide (DC to 10 MHz) range, mA-level to 150 A rms current. Requires power from 3272 and needs scaling operation. Not for use with the F/V UNIT 8940 + 9319. |
|
| Details |
|
|
|
| CLAMP ON PROBE 3275 |
|
 |
Wide (DC to 2 MHz) range, mA-level to 500 A rms current. Requires power from 3272 and needs scaling operation. Not for use with the F/V UNIT 8940 + 9319. |
|
| Details |
|
|
|
| CONVERSION CABLE 9319 |
|
 |
Connects 3273, 3273-50 to F/V UNIT 8940. |
|
|
|
|
|
