| Input |
Number of channels: 2, Connector: Adapter cable connector
* Input isolated from output, inter-channel isolation |
| Converter connector |
Via adapter cable, TAJIMI PRC03-32A10-7F10.5 |
| Suitable converter |
Strain gage converter, bridge impedance: 120-ohm to 1 k-ohm, gage factor 2.00, bridge voltage 2 ±0.05 V |
| Measurement range |
20 µe to 1000 µe/division, 6 settings, the measurement resolution is 1/80 of range
* When attached to recorder where full-scale (f.s.) = 20 divisions
50 µe to 2000 µe/division, 6 settings, the measurement resolution is 1/160 of range
* When attached to recorder where full-scale (f.s.) = 10 divisions
Low-pass filter: 10/30/300 Hz/3 kHz, OFF |
| Maximum sampling rate |
1 MS/s (simultaneous sampling for 2 channels) |
| Accuracy (after auto-balancing) |
DC amplitude: ±(0.5 %f.s. +2 µe) Zero-position: ±0.5 %f.s. |
| Balancing |
Electronic auto-balancing, max. adjustment range ±10000 µe |
| Zero-position |
-50 % to 150 %, 1 % step * With auto-balancing |
| Frequency characteristics |
DC to 20 kHz +1/-3 dB |
| Max. allowable input |
10 V (DC + AC peak) (upper voltage which when applied to between input pins does not damage them) |
| Max. rated voltage to earth |
30 V rms or 60 V DC (upper voltage which when applied to input channel casing or between input channels does not damage them) |
| Accessories |
Conversion cable (2), PRC03-12A10-7M 10.5 (2) |
