| Recorder (Compact instruments for service and maintenance recording) |
MEMORY HiCORDER 8835-01 |
| Products marked with an * (asterisk) do not have the CE mark |
 |
| PC CARD 128M 9726 |
 |
 |
PCMCIA adapter and compact flash memory card set, 128 MB |
|
Details |
|
|
|
| PC CARD 256M 9727 |
|
 |
PCMCIA adapter and compact flash memory card set, 256 MB |
|
| Details |
|
|
|
| PC CARD 512M 9728 |
|
 |
PCMCIA adapter and compact flash memory card set, 512 MB |
|
| Details |
|
|
|
| PC CARD 1G 9729 |
|
 |
PCMCIA adapter and compact flash memory card set, 1 GB |
|
| Details |
|
|
|
| RECORDING PAPER 9231 |
|
 |
216 mm(8.50 in) width × 30 m (98.43 ft), roll type, 6 rolls per set |
|
|
|
| *PAPER WINDER 220H |
|
 |
Paper width 70 mm (2.76 in) to 220 mm (8.66 in), using special-purpose AC adapter |
|
| Details |
|
|
|
|
|
|
|
Input modules |
|
Install or replace simply by inserting the module into the base unit
Note:Input cords are not provided. Please purchase the appropriate input cord for the probe type and application separately. |
|
 |
ANALOG UNIT 8936
|
|
|
|
 |
VOLTAGE/TEMP UNIT UNIT 8937
|
|
|
|
 |
FFT ANALOG UNIT 8938
|
|
|
|
 |
STRAIN UNIT 8939
|
|
|
|
 |
F/V UNIT 8940
|
|
|
|
 |
4ch ANALOG UNIT 8946
|
|
|
|
| LOGIC PROBE 9320 |
|
 |
4-channels, on/off detection of voltage/contact signal |
|
| Details |
|
|
|
| LOGIC PROBE 9321 |
|
 |
4-channel isolated, on/off detection of AC/DC voltage |
|
| Details |
|
|
|
|
| CONNECTION CORD 9197 |
|
 |
For up to 500 V, 1.5 m (4.92 ft) length |
|
| Details |
|
|
|
| CONNECTION CORD 9198 |
|
 |
For up to 300 V, 1.5 m (4.92 ft) length |
|
| Details |
|
|
|
| POWER CORD 9324 |
|
 |
Connects the DIFFERENTIAL PROBE 9322 and logic terminal of the MEMORY HiCORDER |
|
|
|
| POWER CORD 9325 |
|
|
Connects the DIFFERENTIAL PROBE 9322 and sensor terminal of the F/V UNIT 8940 |
|
|
|
| CONNECTION CORD 9217 |
|
 |
Insulation BNC-to-insulation BNC, use to connect to insulation-BNC terminal on Input Module |
|
|
|
| *CONNECTION CORD 9165 |
|
 |
Metal BNC-to-metal BNC, use to connect to metal-BNC terminal on Input Module |
|
|
|
| *PT 9303 |
|
 |
Insulation transformer, 400 V or 200 V AC input, 10 V AC output, for AC power line measurement. |
|
| Details |
|
|
|
|
| CLAMP ON PROBE 9018-50 |
|
 |
Input from 10 to 500 A, 40 Hz to 3 kHz for 0.2 V AC output, BNC terminal |
|
| Details |
|
|
|
| *CLAMP ON PROBE 9132-10 |
|
 |
Input from 20 to 1000 A, 40 Hz to 1 kHz for 0.2 V AC output. BNC terminal |
|
| Details |
|
|
|
| *LINE SPLITTER CT-101A |
|
 |
For 100V/15A, convenient for measuring 100 V AC line current with clamp-on probe |
|
| Details |
|
|
|
| *CLAMP ON SENSOR 9272-10 |
|
Enables observation of distorted AC current waveforms
Input: 5 to 10 kHz, switch between 20 and 200-A ranges possible, 2 V AC out |
|
 |
Can only be used in combination with the SENSOR UNIT 9555-10 or F/V UNIT 8940 |
|
| Details |
|
|
|
| SENSOR UNIT 9555-10 |
|
 |
power supply for the 9270 / 9271 / 9272 / 9272-10 / 9277 / 9278 / 9279, single sensor connectable, includes terminal for waveform output |
|
| Details |
|
|
|
| CONVERSION CABLE 9318 |
|
 |
Connects 9270/9271/9272 clamp-on sensors to F/V UNIT 8940 |
|
|
|
| CLAMP ON PROBE 3273-50 |
|
 |
Wide (DC to 50 MHz) range, mA-level to 30 A peak current. Requires power from 3272 or 3269 or F/V UNIT 8940 |
|
| Details |
|
|
|
| CLAMP ON PROBE 3274 |
|
 |
Wide (DC to 10 MHz) range, mA-level to 150 A rms current. Requires power from 3272 or 3269 |
|
| Details |
|
|
|
| CLAMP ON PROBE 3275 |
|
 |
Wide (DC to 2 MHz) range, mA-level to 500 A rms current, Requires power from 3272 or 3269 |
|
| Details |
|
|
|
| CLAMP ON PROBE 3276 |
|
|
Wide (DC to 100 MHz) range, mA-level to 30 A rms current, Requires power from 3272 or 3269 |
|
| Details |
|
|
|
| POWER SUPPLY 3272 |
|
 |
the 3272 is required for 3273-50, 3274, 3275, 3276 |
|
| Details |
|
|
|
| POWER SUPPLY 3269 |
|
 |
the 3269 is required for 3273-50, 3274, 3275, 3276 |
|
| Details |
|
|
|
| CONVERSION CABLE 9319 |
|
 |
Connects 3273-50 to F/V UNIT 8940 |
|
|
|
|
| RS-232C CARD 9557 |
|
 |
PCMCIA-compliant |
|
| Details |
|
|
|
| GP-IB CARD 9558 |
|
 |
PCMCIA-compliant, * With a GP-IB cable, cord length: 2 m (6.56 ft) |
|
| Details |
|
|
|
| LAN CARD (HIOKI - tested) |
|
 |
compliant, Manufactured by third parties |
|
| Details |
|
|
|
| LAN CABLE 9642 |
|
 |
Straight/cross conversion connector provided, cable length: 5 m (16.41 ft) |
|
|
|
| LAN COMMUNICATOR 9333 |
|
 |
Software required to use a LAN connection with Windows 95/98/Me, or Windows NT 4.0 |
|
| Details |
|
|
|
| WAVE PROCESSOR 9335 |
|
 |
Software required to convert the binary file to CSV file, print, calculation, Cursor Readout, operate under Windows 95/98/Me, NT4.0/2000, XP |
|
| Details |
|
|
|
| FUNCTION UP DISK 9540-01 |
|
| for 8835-01 only, (use the FUNCTION UP DISK 9540 with the 8835) |
|
|
|
| CARRYING CASE 9388 |
|
 |
with casters for convenient transportation |
|
|
|
| DC POWER ADAPTER 9439 |
|
 |
Supplies operating power in the range 10 to 28 V DC |
|
|
|
| CONVERSION ADAPTER 9199 |
|
 |
Banana-to-BNC, use to connect to BNC terminal on Input Module |
|
|
|
| *Trigger Cord 9305 |
|
 |
Connect to the external trigger terminals to trigger another recorder |
|
|
|
|
|
