MEMORY HiCORDER 8808-51

MEMORY HiCORDER 8808-51 < Recorder < Products

Recorder (For power line fault monitoring)

MEMORY HiCORDER 8808-51

OVERVIEW		OPTION		DOWNLOAD CATALOG		EXTRAS

				Printer

PRINTER UNIT 8992

	Printing width of 100 mm (3.94 in), used together with the 8807-01/-51 main body

RECORDING PAPER 9234

	112 mm(4.41 in) width × 18 m (59.06 ft), roll type, 10 rolls per set

*PAPER WINDER 220H

	Paper width 70 mm (2.76 in) to 220 mm (8.66 in), using special-purpose AC adapter

	Details

				Removable storage (CF card)

* PC Card Precaution
Use only PC Cards sold by HIOKI. Compatibility and performance are not guaranteed for PC cards made by other manufacturers. You may be unable to read from or save data to such cards.

PC CARD 2G 9830

	Cannot use

PC CARD 1G 9729

	Supplied with PC Card adapter, 1GB capacity
	Details

PC CARD 512M 9728

	Supplied with PC Card adapter, 512MB capacity
	Details

PC CARD 256M 9727

	Supplied with PC Card adapter, 256MB capacity
	Details

				Logic Signal Measurement

LOGIC PROBE 9320-01

	4-channels, on/off detection of voltage/contact signal(Exclusive use with 8808-01/-51, small connector type)

	Details

LOGIC PROBE 9321-01

	4-channel isolated, on/off detection of AC/DC voltage(Exclusive use with 8808-01/-51, small connector type)

	Details

CONVERSION CABLE 9323

	Used for connecting the 9320/9321 (large terminal types) and the 8808-01, 8808-51 MEMORY HiCORDERs (small terminal types), because the terminal shapes are different.
* This cable is not required for the small-terminal types 9320-01, and 9321-01.

				Voltage measurement

CONNECTION CORD 9197

	For up to 500 V, 1.5 m (4.92 ft) length

	Details

CONNECTION CORD 9198

	For up to 300 V, 1.5 m (4.92 ft) length

	Details

DIFFERENTIAL PROBE 9322

	For up to 2kV DC or 1kV AC. Use with either AC Adapter 9418-15

	Details

CONNECTION CORD 9217

	Insulation BNC-to-insulation BNC, use to connect to insulation-BNC terminal

				Current measurement

* Note that it is not possible to use the model 3283, 3284, or 3285 for power analysis !

CLAMP ON PROBE 9018-50

	Input from 10 to 500 A, 40 Hz to 3 kHz for 0.2 V AC output, BNC terminal

	Details

*CLAMP ON PROBE 9132-10

	Input from 20 to 1000 A, 40 Hz to 1 kHz for 0.2 V AC output. BNC terminal

	Details

CLAMP ON LEAK HiTESTER 3283

	For leakage current measurement, includes 10 mA to 200 A ranges, with analog output of 1 V f.s. DC, and waveform monitor output of 1 V f.s. AC at 40 Hz to 2 kHz. Requires the AC ADAPTER 9445-02/9445-03

	Details

CLAMP ON AC/DC HiTESTER 3284

	For load current measurement (AC/DC), 20 A or 200 A ranges, with analog output of 1 V f.s. DC, and waveform monitor output of 1 V f.s. AC, Frequency band: DC, or 10 Hz to 2 kHz, 33 mm (1.3 in) dia. Requires the AC ADAPTER 9445-02/9445-03

	Details

CLAMP ON AC/DC HiTESTER 3285

	For load current measurement (AC/DC), 200 A or 2000 A ranges, with analog output of 1 V f.s. DC, and waveform monitor output of 1 V f.s. AC, Frequency band: DC, or 10 Hz to 1 kHz, 55 mm (2.17 in) dia. Requires the AC ADAPTER 9445-02/9445-03

	Details

*OUTPUT CORD 9094

	Required along with the 9199 adapter to connect Model 3283/ 3284/ 3285 to the 8808-01/-51

CONVERSION ADAPTER 9199

	Banana-to-BNC, use to connect to BNC terminal on Input Module

*LINE SPLITTER CT-101A

	For 100V/15A, convenient for measuring 100 V AC line current with clamp-on probe

	Details

				PC communication

WAVE PROCESSOR 9335

	Bundled application software (data acquisition software, Windows 2000 SP4 or later, Windows XP SP2 or later)

	Details

RS-232C CABLE 9612

	Mini DIN 9-pin - Dsub 9-pin, 1.5 m (4.92 ft) length

				Other options

AC ADAPTER 9418-10

	Universal 100 to 240 V AC, 12 V DC/ 2.5 A output

BATTERY PACK 9447

	7.2 V, 2400 mAh

CHARGE STAND 9643

	Used with the AC ADAPTER 9418-10 to charge one BATTERY PACK 9447

CARRYING CASE 9648

	Hard case type, for storing options

CARRYING CASE 9391

	Soft case type, for storing options, Holds more options than the 9648 hard case

OVERVIEW

OPTION

DOWNLOAD CATALOG

EXTRAS