| Recorder (Compact instruments for service and maintenance recording) |
8807-01 MEMORY HiCORDER |
| Products marked with an * (asterisk) do not have the CE mark |
 |
| PRINTER UNIT 8992 |
 |
 |
Printing width of 100 mm (3.94 in), used together with the 8807-01/-51 main body |
|
|
|
| RECORDING PAPER 9234 |
|
 |
112 mm(4.41 in) width × 18 m (59.06 ft), roll type, 10 rolls per set |
|
|
|
| *PAPER WINDER 220H |
|
 |
Paper width 70 mm (2.76 in) to 220 mm (8.66 in), using special-purpose AC adapter |
|
Details |
|
|
|
| PC CARD 128M 9726 |
|
 |
PCMCIA adapter and compact flash memory card set, 128 MB |
|
| Details |
|
|
|
| PC CARD 256M 9727 |
|
 |
PCMCIA adapter and compact flash memory card set, 256 MB |
|
| Details |
|
|
|
| PC CARD 512M 9728 |
|
 |
PCMCIA adapter and compact flash memory card set, 512 MB |
|
| Details |
|
|
|
| PC CARD 1G 9729 |
|
 |
PCMCIA adapter and compact flash memory card set, 1 G |
|
| Details |
|
|
|
|
| LOGIC PROBE 9320-01 |
|
 |
4-channels, on/off detection of voltage/contact signal(Exclusive use with 8807-01/-51, small connector type) |
|
| Details |
|
|
|
| LOGIC PROBE 9321-01 |
|
 |
4-channel isolated, on/off detection of AC/DC voltage(Exclusive use with 8807-01/-51, small connector type) |
|
| Details |
|
|
|
| CONVERSION CABLE 9323 |
|
 |
Used for connecting the 9320/9321 (large terminal types) and the 8807-01, 8807-51 MEMORY HiCORDERs (small terminal types), because the terminal shapes are different. |
| * This cable is not required for the small-terminal types 9320-01, and 9321-01. |
|
|
|
| CONNECTION CORD 9197 |
|
 |
For up to 500 V, 1.5 m (4.92 ft) length |
|
| Details |
|
|
|
| CONNECTION CORD 9198 |
|
 |
For up to 300 V, 1.5 m (4.92 ft) length |
|
| Details |
|
|
|
| DIFFERENTIAL PROBE 9322 |
|
 |
For up to 2kV DC or 1kV AC. Use with either AC Adapter 9418-15 |
|
| Details |
|
|
|
| CONNECTION CORD 9217 |
|
 |
Insulation BNC-to-insulation BNC, use to connect to insulation-BNC terminal on Input Module, 1.5 m (4.92 ft) length |
|
|
|
|
| CLAMP ON PROBE 9018-50 |
|
 |
Input from 10 to 500 A, 40 Hz to 3 kHz for 0.2 V AC output, BNC terminal |
|
| Details |
|
|
|
| *CLAMP ON PROBE 9132-10 |
|
 |
Input from 20 to 1000 A, 40 Hz to 1 kHz for 0.2 V AC output. BNC terminal |
|
| Details |
|
|
|
| CLAMP ON LEAK HiTESTER 3283 |
|
 |
For leakage current measurement, includes 10 mA to 200 A ranges, with analog output of 1 V f.s. DC, and waveform monitor output of 1 V f.s. AC at 40 Hz to 2 kHz. Requires the AC ADAPTER 9445-02/ 9445-03 |
|
| Details |
|
|
|
| *OUTPUT CORD 9094 |
|
 |
Required along with the 9199 adapter to connect Model 3283 to the 8807-01/-51 |
|
|
|
| CONVERSION ADAPTER 9199 |
|
 |
Banana-to-BNC, use to connect to BNC terminal on Input Module |
|
|
|
| *LINE SPLITTER CT-101A |
|
 |
For 100V/15A, convenient for measuring 100 V AC line current with clamp-on probe |
|
| Details |
|
|
|
| WAVE PROCESSOR 9335 |
|
 |
Bundled application software (data acquisition software, Windows 2000 SP4 or later, Windows XP SP2 or later) |
|
| Details |
|
|
|
| RS-232C CABLE 9612 |
|
 |
Mini DIN 9-pin - Dsub 9-pin, 1.5 m (4.92 ft) length |
|
|
|
|
| AC ADAPTER 9418-10 |
|
 |
Universal 100 to 240 V AC, 12 V DC/ 2.5 A output |
|
|
|
| BATTERY PACK 9447 |
|
 |
7.2 V, 2400 mAh |
|
|
|
| CHARGE STAND 9643 |
|
 |
Used with the AC ADAPTER 9418-10 to charge one BATTERY PACK 9447 |
|
|
|
| CARRYING CASE 9648 |
|
 |
Hard case type, for storing options |
|
|
|
| CARRYING CASE 9391 |
|
 |
Soft case type, for storing options, Holds more options than the 9648 hard case |
|
|
|
|
|
