 |
| Clamp Meters(Leak Current Meters -for AC only-) |
CLAMP ON LEAK HiTESTER
3293-50 |
|
|
|
CAT III 300V |
Max. rated voltage to earth 300V rms insulated wire |
|
 |
|
180°Open and Close system |
|
 |
|
|
|
|
|
| Easily read measured values from all heights with the adjustable display |
|
- Measure for leakage current and load all with the same device
- Innovative flip clamp design
- Flip display to see measurement readings from any angle
- 1mA to 1000A accuracy guaranteed, 6 ranges and bar graph display
- Measure and display only the leakage current of commercial frequency components using the filter function
|
|
| Basic specifications (Accuracy guaranteed for 1 year, or opening and closing of the clamp sensor 10,000 times) |
|
| AC Current |
30.00m/300.0m/6.000/60.00/600.0/1000A, 6 ranges, 45Hz to 400Hz, True RMS
Basic accuracy: ±1.5% rdg. ±5dgt. (50/60Hz, filter ON) |
| AC Voltage |
n/a |
| Frequency |
n/a |
| Crest factor |
2.8 and under (1.68 and under at 1000 A range) |
| Filter function |
Cut off frequency 180Hz at filter ON (-3dB) |
| Output function |
n/a |
| Other function |
Flip-open mechanism (but still retaining proper orientation of display), Back light, Maximum value display, Data hold, Auto power off |
| Display |
Digital LCD, max. 6000dgt., 91 segments
Display refresh rate: 1.1 sec or higher |
| Power supply |
Coin type lithium battery (CR2032) × 1, Continuous use 18 hours |
| Core jaw dia. |
φ 24mm (0.94 in) |
| Dimensions, mass |
50mm (1.97 in) W × 130mm (5.12 in) H × 26mm (1.02 in) D, 135g (4.8 oz) |
| Supplied accessories |
CARRYING CASE 9757 ×1, Strap ×1, Instruction manual ×1,
Coin type lithium battery (CR2032, for trial purposes only) ×1 |
|
|
