| Power Measuring Instruments (Wide bandwidth AC/DC, multi-purpose models) |
POWER HiTESTER 3193 |
| Products marked with an * (asterisk) do not have the CE mark |
 |
| Note: |
The 3193 cannot be used alone. Measurement requires one or more input units. Use the same input unit for a particular measurement line. For the 9603/9604/9605, only one unit can be installed. |
|
| AC/DC DIRECT INPUT UNIT 9600 |
 |
 |
|
|
|
|
| AC DIRECT INPUT UNIT 9601 |
|
 |
|
|
|
|
| AC/DC CLAMP INPUT UNIT 9602 |
|
 |
|
|
|
|
| EXTERNAL SIGNAL INPUT UNIT 9603 |
|
 |
|
|
|
|
HARMONIC / FLICKER MEASUREMENTS UNIT 9605
|
|
|
|
|
| Note:When the 9602 is selected, use the optional clamp-on sensor |
|
| *CLAMP ON SENSOR 9272-10 |
|
Enables observation of distorted AC current waveforms
Input: 5 to 10 kHz, switch between 20 and 200-A ranges possible, 2 V AC out |
|
 |
Can only be used in combination with the SENSOR UNIT 9555-10 or F/V UNIT 8940 |
|
Details |
|
|
|
| UNIVERSAL CLAMP ON CT 9277 |
|
 |
rated current 20 A AC/DC (continuous 50 A rms/75 A peak) |
|
| Details |
|
|
|
| UNIVERSAL CLAMP ON CT 9278 |
|
 |
rated current 200 A AC/DC (continuous 350 A rms/500 A peak) |
|
| Details |
|
|
|
| *CLAMP ON SENSOR 9279 |
|
 |
rated current 500 A AC/DC (continuous 650 A rms/920 A peak) |
|
| Details |
|
|
|
| *CLAMP ON ADAPTER 9290-10 |
|
 |
rated current 1000 A AC, output 100 A (10:1 ratio) |
|
| Details |
|
|
|
| AC/DC Current Sensor 9709 |
|
 |
rated current 500A AC/DC (continuous 700A) |
|
| Details |
|
|
|
| PRINTER UNIT 9604 |
|
 |
|
|
|
|
RECORDING PAPER 9232
72 mm(2.83 in) width × 10 m (32.81 ft), roll type, 10 rolls per set |
|
|
|
| *PAPER WINDER 220H |
|
 |
Paper width 70 mm (2.76 in) to 220 mm (8.66 in), using special-purpose AC adapter |
|
| Details |
|
|
|
| GP-IB CONNECTOR CABLE 9151-02 |
|
 |
2 m (6.56 ft) length |
|
|
|
| GP-IB CONNECTOR CABLE 9151-04 |
|
 |
4 m (13.12 ft) length |
|
|
|
|
|
