Japanese Chinese Korea
Download Software
FUNCTION UP DISK 9540 for MEMORY HiCORDER 8835 < Download Software < Download
FILE DATA

FUNCTION UP DISK 9540 for MEMORY HiCORDER 8835

Version 5.23 9540v524.zip (ZIP format) 969KB 2002.5.24 Download
Specifications
  1. The FUNCTION UP DISK 9540 adds the following functions to the MEMORY HiCORDER 8835:
    • FFT Function
    • REC&MEM Function
    • Waveform Decision Functions (Waveform Area Decision and Waveform Parameter Decision)
    • Computation Functions (Averaging, Waveform Processing Calculation)
    • Memory Segmentation Function (Sequential Save, Multi-block)

  2. Installation Procedures
    • FFT Function
    • Before installing, check the version number of the MEMORY HiCORDER 8835, which is displayed when the unit is turned on. The FUNCTION UPGRADE DISK 9540 can only be installed in Model 8835 installed with firmware ver.1.04 or later, and is not compatible with ver.1.00 to 1.03.
    • Unzip the file “9540v523.zip” on your PC to reveal two program files, “9540DSK1.PRG” and “9540DSK2.PRG.”
    • Copy each program file onto 2 separate floppy disks and name them Disk 1 and Disk 2 according to the program file name:
      9540DSK1.PRG -> Disk 1
      9540DSK2.PRG -> Disk 2
      You may also copy both program files onto 1 PC Card.
    • Insert the Floppy Disk 1 or the PC Card into the respective 8835 media slot. Load “9540DSK1.PRG” using the FILE screen.
    • After the first program file is loaded, the message “Insert Disk 2 and press any key” will be displayed. Insert Floppy Disk 2, or keep the PC Card inserted, and press any key to begin loading the second program file.
    • After the second file has been loaded, the internal program will begin rewriting automatically. Wait for approximately 2 minutes. DO NOT TURN OFF THE POWER. Doing so will result in damage to the 8835 and the unit must then be repaired at the factory for a nominal fee.
    • After the re-writing process has been completed, the message [FINISH! Turn off the power.] will be displayed.
    • Restart the 8835 by turning OFF then power and then turning it ON again. If [Version Has Changed] is displayed, the upgrade was successfully completed.
    You can then proceed to use the 8835 with the added functions.

  3. Important Notes
    • FFT Function
    • After installing the FUNCTION UP DISK 9540, the 8835 will revert to its initial default settings. If required, save your setting conditions in a separate disk or PC Card before installing the program.
    • The FUNCTION UP DISK 9540 is only for use with MEMORY HiCORDER 8835, and is not compatible with MEMORY HiCORDER 8835-01. Do not attempt to install this program into Model 8835-01. For similar advanced functions for Model 8835-01, please purchase FUNCTION UP DISK 9540-01.
    • The instruction manual for the FUNCTION UP DISK 9540 is sold separately.
NOTES
  • Operating Environment
    The FUNCTION UP DISK 9540 is only for use with MEMORY HiCORDER 8835, and is not compatible with MEMORY HiCORDER 8835-01.

  • Precautions
    1. Copyright
      This driver and its related documents are copyrighted by HIOKI E.E.CORPORATION and Peritec CORPORATION.

    2. Conditions for use
      This driver can not be bundled with commercial software or publications or otherwise sold without the permission of the copyright holder.
      Furthermore, this driver cannot be modified without the permission of the copyright holder.

    3. Responsibility for use
      This driver is freeware. The user can use it freely, but is responsible for its use.
      Hioki Electric can bear no responsibility for any consequences arising from the use of this software.
Contact information
  • We welcome your opinions, requests, and comments on the operation of this software, and also request that you report any bugs that you may discover. Please contact us by e-mail at the address shown below.
  • Please note that by sending us any opinions or requests, you are granting us permission to make use of those opinions or requests.
  • E-mail: os-com@hioki.co.jp (HIOKI E. E. CORPORATION, International Sales and Marketing Section)
Back